Top 9 CV Axle Shaft Puller – Puller Sets

As an Amazon Associate I earn from qualifying purchases.

1. ABN

#ad

CV Axle Puller Slide Hammer Set with 5 lb Slide Hammer and CV Joint Puller Adapter, ABN Inner CV Axle Removal Tool

#ad
ABN #ad - Remove front wheel drive axles easily to replace or repair your cv axle joints easily, use the ABN FWD Axle Puller Slide Hammer Puller Set; The CV joint puller adapter and large slide hammer bearing puller allow you to create added torque to loosen and remove stubborn axle shafts and water pumps.

Drop-forged steel slide hammer weight provides a secure grip; Heat-treated FWD axle puller adapter with black oxide finish is durable and resists rust and corrosion. Safe for your vehicle slide hammer cv joint puller and attachment design focuses the added torque to the back of the housing to prevent damage to the roller bearing inside the joint; Pulls CV joints on 1986-current Taurus/Sable. Fits your needs chrome-plated 23 x 5/8-inch hammer bar features a 5/8-inch x 18 threaded section to fit your adapters, while the slide hammer CV axle adapter has 48mm roughly 2-inch opening and a 2.

5-inch depth to fit your needs. Easy to use attach the inner cv axle puller to your axle slide hammer then position the adapter around the shaft behind the inner boot; Slide the 5 lb hammer weight back and forth to create torque to pull out the axle; Use lubricant fluid for added ease not included. Built to last hardened hammer shaft provides strength and durability, while the T-handle and 5 lb.
BrandABN #ad
ManufacturerABN #ad
Height5 Inches
Length26 Inches
Weight8.29 Pounds
Width3 Inches
Part Number5574
Model5574

2. Generic

#ad

Compatible for 7 PC Drive Shaft Pulling Puller Extractor Tool Kit Set for E32 X5

#ad
Generic #ad - M22x1. 5 for E30 M24x1. 5 for e36 and W203. M16x1. 5; m20x1. 5. M30x1. 5 for e32/e36/E34. M27x1. 5 for e32/e34/e38/e39/X5.
BrandGeneric #ad
ManufacturerWINTOOLS #ad
Height8.66 Inches
Length2.17 Inches
Weight4.85 Pounds
Width10.63 Inches
Part NumberGeneric

3. DPTOOL

#ad

Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit Heavy Duty 10 Pounds Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments

#ad
DPTOOL #ad - Combinnation kit: this kit include: 1 heavy duty slide hammer; 1 opening 63mm cv joint fork; 1 opening 48mm cv joint fork; 1 manual puller; 2pc 16mm nut. The joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, the CV Joint Fork is be threaded internally, have wide use. Heavy duty: our slide hammers are heavier and larger than normal ones, slide hammer and the VC join fork is made of heavy duty steel, is twice the average slide hammer, easier to use and work more better, hammer weight is 10.

5 lb, length is 19. 5 inches, have sufficient length slide to generate more force, so the generated pulling force is also twice of a normal slide hammer, durable and not easy to break. Use our cv joint slide hammer, the handle is curved and have a large surface, work more efficiently. This kit have everthing you need to remove cv axle or half shaft, and we offer 12 months warranty, we will refund or replace, easy to carry, all the tools put in a plastic case, if the tool have any quality problem.

Effient slide hammer: our slide and the slide hammer follow ergonomic design, which use more comfortable. Easy to remove cv axle: use this cv joint puller, not need spend a lot of effort, You will pull the old stubborn CV axle and get the new axle installed, without causing damage to expensive aluminum transmission cases or other components. With 63mm 48mm joint fork: our kit include opening 63mm and 48mm cv joint fork removing adapter, and the Slide Hammer stick is threaded externally.
BrandDPTOOL #ad
ManufacturerDPTOOL #ad
Part NumberH226

4. MR CARTOOL

#ad

Front Wheel Drive Fork Joint Shaft, MR CARTOOL 1040 CV Axle Removal Tool, Automotive Pulley Attachment Slide Hammer Adapter with Wide Opening 63mm

#ad
MR CARTOOL #ad - Work with your slide hammer: the cv joint puller attaches to your slide hammer and allows you to create added torque to loosen and remove stubborn axle shafts and water pumps. Easy to use: attach the inner cv removal tool to your slide hammer, then slide the adapter around the shaft behind the inner boot; Use the slide hammer to create torque to pull out the axle; Use lubricant fluid for added ease not included.

Inner cv axle removal tool has 63mm opening and a 2. 5-inch depth to fit your needs. Main function: this product is designed to pull front wheel drive CV axles with hidden retaining rings from the transaxle, without damaging joints.

Protect your vehicle: unlike pry bars or cv axle fork tools, the CV shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint. Durable material: heat-treated CV shaft removal tool is designed for maximum strength and features a black oxide finish for resistance to rust and corrosion.
BrandMR CARTOOL #ad
ManufacturerMR CARTOOL #ad
Part NumberRemoval Tool

5. Amerbm

#ad

Amerbm CV Joint Puller Propshaft Separator Set Universal 9 Holes Axle tie Rod Puller Removal Tool

#ad
Amerbm #ad - Function : amerbm's cv axle puller tool can quickly removes the CV joint from the drive shaft without damaging the joint, it can be use for removing the automobile drive shaft more easier and faster.

Applicable : includes 9 holes to allow full adjustment that suits different lengths of joint assemblies on most cars; Fits most vehicles equipped with constant velocity U-joints. Length: 230mm. Amerbm's guarantee : for removal only, not intended for installation. Size : maximum cvj diameter: 95mm. If you have any question, please feel free to let us know. Material : bar constructed from carbon steel for maximum strength and longevity that resists rust and corrosion.
BrandAmerbm #ad
ManufacturerAmerbm #ad
Part Number2090ZCCT
ModelCV Joint Puller 2090

6. OEMTOOLS

#ad

Fix Damaged CV Joints, OEMTOOLS 27305 Axle Popper Kit, Remove Most Vehicles’ Half-Shaft Drive Axles, Fork & Shim Tool

#ad
OEMTOOLS #ad - Protect your transmission and suspension: these wedge and shims tools are used to complete important jobs that should not be left undone or be attempted with the wrong tools; damaged axles can cause all sorts of issues with your CV joints, and hubs.

Drive train and suspension tool: cv axle removal tool can be used to remove axles from the transmission, remove ball joints in your suspension system, and to remove tie rods; There are many common jobs this pickle fork tool set can assist with. Axle remover tool kit includes: comes with axle shim tool & fork/Wedge Tool, each 13-3/4 inches long with a 2 Inch Opening; Together our shims and wedges make an easy-to-use and highly effective cv puller tool.

Simple, designed to withstand intense pressure and powerful hammer strikes; these axle puller tools are simple, durable mechanic’s tools: fashioned from hardened steel, yet powerful, and are designed to do their job well. A tool that just works: the fork design of these cv axle remover tools allows you to exert force evenly on both sides of the axle, once you’ve loosened the axle from the transmission, and then, you can use the forks to pry the axle.
BrandOEMTOOLS #ad
ManufacturerOEMTOOLS #ad
Height1.42 Inches
Length15.2 Inches
Weight3.75 Pounds
Width3.54 Inches
Part Number27305
Model27305
WarrantyOEMTOOLS Limited Lifetime

7. OTC

#ad

OTC 7509 Inner CV Joint Puller

#ad
OTC #ad - Tool is available with fork only, C. V. Joint slide hammer assembly or just the slide hammer extension. With this puller, thanks to the straight, the axle assembly is popped out of the transaxle without damage, even pull provided by the slide hammer. This tool pulls constant velocity joints on 1986-current Taurus/Sable.
BrandOTC #ad
ManufacturerOTC #ad
Height3.4 Inches
Length4.2 Inches
Weight1.25 Pounds
Width25 Inches
Part Number7509
Model7509
Warranty1 year manufacturer

8. CTA Tools

#ad

CTA Tools 1040 CV Joint Puller Adapter with Wide Opening

#ad
CTA Tools #ad - Applications include, but are not limited to: 1997-2017 ford f-150 4. 2l, 4. 6l, 1997-2017 ford expedition 4. 6l, 2010-2014 ford f-150 svT Raptor 6. 2l, 5. 4l, 5. 4l, & 2007-2015 lincoln Navigator 5. 4l. To check compatibility with applications not listed, refer to dimensions in product image. 63. 5mm wide opening allows proper fitment wide applications. Services the wide-style inner cV Joint Assembly, found on Ford F150 4WD and other vehicles. Forged steel construction with black finish. 5/8" - 18 threaded hole works with CTA #A490 Puller and other standard pulling tools.
BrandCTA Tools #ad
ManufacturerCTA Tools #ad
Weight0.65 Pounds
Part Number1040
Model1040

9. ABN

#ad

ABN Front Wheel Drive Axle Pulley Attachment, CV Axle Removal Tool CV Joint Slide Hammer Adapter

#ad
ABN #ad - Works with your slide hammer the cv joint puller attaches to your slide hammer and allows you to create added torque to loosen and remove stubborn axle shafts and water pumps; Fits slide hammers with 5/8-inch x 18 threads. Built to last heat-treated cv puller adapter with black oxide finish ensures optimal strength and durability while resisting rust and corrosion; Inner CV axle removal tool has 48mm roughly 2-inch opening and a 2.

5-inch depth to fit your needs. Safe for your vehicle unlike pry bars or cv axle fork tools, the cV shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint; Pulls CV joints on 1986-current Taurus/Sable.

Remove front wheel drive axles easily to replace or repair your constant velocity CV axle joints, use the ABN Front Wheel Drive Axle Puller Attachment; Inner CV axle puller designed to pull joints with hidden retaining rings from FWD vehicles. Easy to use attach the inner cv removal tool to your slide hammer then slide the adapter around the shaft behind the inner boot; Use the slide hammer to create torque to pull out the axle; Use lubricant fluid for added ease not included.
BrandABN #ad
ManufacturerABN #ad
Height1.5 Inches
Length5 Inches
Weight0.9 Pounds
Width5 Inches
Part Number5543