As an Amazon Associate I earn from qualifying purchases.
Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Evergreen Parts And Components #ad - Gas nitrited steel piston rings, Reduce Tension with Better Fuel Economy, 50% longer Life, Reduce Cylinder Wear. Easily lasts 150, 000+ miles. Engine bearings with high strength overlay plate, and reduced thickness for Improved Fatigue Properties.
Fel-Pro #ad - Superior seal -- proprietary rubber sealing beads help eliminate potential leak paths for a superior seal. Strong and durable -- features molded rubber over an aluminized steel carrier which resists high heat and coolants.
Designed for imperfect sealing surfaces -- engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces.
A-Team Performance #ad - Iii/iv ls-based 4. 8 l / 293 in3 lr4, ls6, 5. 3 l / 325 in3 l33, l59, 5. 7 l / 346 in3 ls1, lm4, and 6. 0 l / 364 in3 lq4, lm7, lq9, ls2.
Intake is about 2" taller than stock. Includes: fabricated aluminum sheet metal intake Manifold 102MM Throttle Body Fuel Rails & Cross Over 4-Bolt LSX. Fitment on LS4 would require significant modification.
A-Team Performance #ad - This intake is about 2" taller than stock. Includes: black intake manifold, black Fuel Rails, black throttle Body, and Fuel Crossover Line; Also includes Gaskets and Hardware.
JEGS #ad - Improve engine performance and horsepower with this higher flowing intake manifold compared to a stock cast iron intake. Fits gm and chevrolet vortec cast iron cylinder heads from 1996 through 2002.
Fel-Pro #ad - Engineering expertise -- parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development.
Real-world tested -- parts are tested on-vehicle and validated to ensure optimal performance on the road. Designed for imperfect sealing surfaces -- engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces.
Fel-Pro #ad - Designed for imperfect sealing surfaces -- engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces.
Real-world tested -- parts are tested on-vehicle and validated to ensure optimal performance on the road. Engineering expertise -- parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development.
1. TamerX
#adTamerX Vortec Spider Fuel Injector Assembly With Plenum Gasket Kit for Chevrolet/GMC 5.0L/5.7L
#adTamerX #ad - Free expedited shipping. Ensures smooth engine operation, cleaner emissions, improved fuel economy, and increased performance. Includes complete gasket set that kits from other manufacturers do not offer.More information #ad
Includes all necessary parts and gaskets to perform a complete installation. 1 year, unlimited Mileage Warranty.| Brand | TamerX #ad |
| Manufacturer | TamerX #ad |
| Height | 4 Inches |
| Length | 12 Inches |
| Width | 4 Inches |
| Part Number | CP8-K |
More information #ad
2. Dorman
#adDorman 615-305 Engine Intake Manifold Gasket Set Compatible with Select Models
#adDorman #ad - Restores functionality - this gasket set is made to fit and fully restore part functionality after the original gasket fails. Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
More information #ad
Direct replacement - this engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles. Durable construction - this part is made from quality materials to ensure reliable performance and long service life.| Brand | Dorman #ad |
| Manufacturer | Dorman Products #ad |
| Height | 2.3 Inches |
| Length | 20.5 Inches |
| Weight | 1.75 Pounds |
| Width | 8 Inches |
| Part Number | 615-305 |
| Model | 615-305 |
| Warranty | Limited Lifetime Warranty |
More information #ad
3. Evergreen Parts And Components
#adStandard Size Main Rod Bearings, Standard Size Piston Rings, Evergreen Engine Rering Kit FSBRR8-10116 Compatible With 96-02 Cadillac Chevrolet GMC VORTEC 5.7 OHV VIN R Full Gasket Set
#adMore information #ad
Hardened steel backs on all rod bearings to Improve the Support of the Bearing Lining And Assist with Bearing Retention in the Housing. Fits: 96-02 cadillac chevrolet gmc vortec 5. 7 ohv vin r see description below. Each gasket and gasket Set is Made to be Durable and Long-lasting. Meets or exceeds oem specifications.| Brand | Evergreen Parts And Components #ad |
| Manufacturer | Evergreen Parts And Components #ad |
| Part Number | FSBRR8-10116 |
More information #ad
4. Fel-Pro
#adFEL-PRO MS 98000 T Intake Manifold Gasket Set
#adDesigned for imperfect sealing surfaces -- engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces.
More information #ad
Every part for the repair -- fel-pro gasket sets include every part needed for the repair unless otherwise noted. Prevents overtightening -- torque limiters help eliminate overtightening and gasket splitting and extruding. Easier to install -- locating tabs assure proper alignment and easier installation.| Brand | Fel-Pro #ad |
| Manufacturer | FEL-PRO #ad |
| Height | 1 Inches |
| Length | 23.8 Inches |
| Weight | 1.5 Pounds |
| Width | 8.4 Inches |
| Part Number | MS98000T |
| Model | MS 98000 T |
More information #ad
5. A-Team Performance
#adEFI Fabricated Intake Manifold with Fuel Rails and Throttle Body 15° Throttle Opening Short, A-Team Performance, Compatible with GM LS LS1 LS2 LS6 Black
#adIntake is about 2" taller than stock. Includes: fabricated aluminum sheet metal intake Manifold 102MM Throttle Body Fuel Rails & Cross Over 4-Bolt LSX. Fitment on LS4 would require significant modification.
More information #ad
Compatible with: chevrolet small block v8 gen. Efi fabricated intake manifold with Fuel Rails and Throttle Body 15° Throttle Opening Short, Black. Compatible with ls-based engines with "cathedral" intake port shape only. Gaskets and hardware included.| Brand | A-Team Performance #ad |
| Manufacturer | A-Team Performance #ad |
| Part Number | 501BK-1006BK |
More information #ad
6. A-Team Performance
#adA-Team Performance, Compatible with Chevrolet GMC Pontiac LS LS1 LS2 LS6 Silver, Intake Manifold 102mm Throttle Body Fabricated Metal Sheet
#adMore information #ad
Intake manifold 102mm throttle Body Fabricated TIG Welded Aluminum Metal Sheet. Compatible with cathedral style ls1 lS2 LS6 4. 8/5. 3/5. 7/6. 0 heads. Black 3mm Sheet Metal Aluminum.| Brand | A-Team Performance #ad |
| Manufacturer | A-Team Performance #ad |
| Part Number | 502CA |
| Model | 502CA |
More information #ad
7. JEGS
#ad5500 RPM Power Range | Black Cast Aluminum | Square Bore Mounting Pad, JEGS Small Block Chevy 1996-2002 Intake Manifold | For Use With Vortec Cast Iron Cylinder Heads | Non-EGR | Idle
#adMore information #ad
Fabricated from black cast aluminum for weight savings, great looks, and improved performance. Designed to fit with popular aftermarket square bore 4150 carburetors including edelbrock, Holley, Quickfuel, Proform, and more. Idle to 5500 rpm power band for street or mild race applications.| Brand | JEGS #ad |
| Manufacturer | JEGS #ad |
| Height | 5.8 Inches |
| Length | 21.6 Inches |
| Weight | 16 Pounds |
| Width | 12.3 Inches |
| Part Number | 513004 |
More information #ad
8. Fel-Pro
#adFEL-PRO 1255 Intake Manifold Gasket Set
#adReal-world tested -- parts are tested on-vehicle and validated to ensure optimal performance on the road. Designed for imperfect sealing surfaces -- engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces.
More information #ad
Every part for the repair -- fel-pro gasket sets include every part needed for the repair unless otherwise noted. Sealing technologies -- exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair.| Brand | Fel-Pro #ad |
| Manufacturer | FEL-PRO #ad |
| Height | 0.4 Inches |
| Length | 25.8 Inches |
| Weight | 0.33 Pounds |
| Width | 3.8 Inches |
| Part Number | 1255 |
| Model | 1255 |
More information #ad
9. Fel-Pro
#adFEL-PRO 1205 Intake Manifold Gasket Set
#adReal-world tested -- parts are tested on-vehicle and validated to ensure optimal performance on the road. Engineering expertise -- parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development.
More information #ad
Sealing technologies -- exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair. Every part for the repair -- fel-pro gasket sets include every part needed for the repair unless otherwise noted.| Brand | Fel-Pro #ad |
| Manufacturer | FEL-PRO #ad |
| Height | 7.87 Inches |
| Length | 5.91 Inches |
| Weight | 0.2 Pounds |
| Width | 1.97 Inches |
| Part Number | 1205 |
| Model | 1205 |
| Warranty | Manufacturer Warranty |
More information #ad
