Top 9 2WD Ball Joints – Automotive Replacement Control Arms

As an Amazon Associate I earn from qualifying purchases.

1. Detroit Axle

#ad

4pc Front Upper Control Arms and Lower Ball Joints Kit 2WD Coil Spring Suspension for 1999-2006 Chevy Silverado/Sierra 1500, 2007 Classic Chevy Silverado/Sierra 1500, Detroit Axle

#ad
Detroit Axle #ad - 1999-2006 gmc sierra 1500 2wd coil spring suspension - 2007 classic GMC Sierra 1500 2WD Coil Spring Suspension. Undergo impact, wear, and fatigue testing to help ensure quality and durability. Check compatibility Chart For Fitment. Built to strict quality control standards. 1999-2006 chevy silverado 1500 2wd coil spring suspension - 2007 Classic Chevy Silverado 1500 2WD Coil Spring Suspension.
BrandDetroit Axle #ad
ManufacturerDetroit Axle #ad
Height7.95 Inches
Length14.29 Inches
Weight21.5 Pounds
Width12.01 Inches
Part Number80416-4D

2. Parts Warehouse

#ad

4 Pc Suspension Kit Upper & Lower Ball Joints

#ad
Parts Warehouse #ad - Before placing the order, please check your car model in the Amazon Fitment Filter System in the top left corner. Compatible with chevrolet silverado 1500 1999-2006 rwd models chevrolet silverado 1500 classic 2007 rWD Models GMC Sierra 1500 1999-2006 RWD Models GMC Sierra 1500 Classic 2007 RWD Models.

Designed with premium quality materials for exceptional performance, reliability and peace of mind. Dust boot is re-installed and permanently attached to reduce contamination, and increase durability and service life. Oem design direct fit / undergo impact, wear, and fatigue testing to help ensure quality and durability.
BrandParts Warehouse #ad
ManufacturerPartsW #ad
Weight9 Pounds
Part NumberPW0111

3. Detroit Axle

#ad

10pc Front Upper Control Arms, Inner Outer Tie Rods w/Sway Bars Kit 2WD Coil Spring for 99-06 Chevy Silverado/Sierra 1500, Lower Ball Joints, Detroit Axle, 2007 Classic Chevy Silverado/Sierra 1500

#ad
Detroit Axle #ad - Check compatibility Chart For Fitment. Undergo impact, wear, and fatigue testing to help ensure quality and durability. 1999-2006 gmc sierra 1500 2wd coil spring suspension - 2007 classic GMC Sierra 1500 2WD Coil Spring Suspension. Built to strict quality control standards. 1999-2006 chevy silverado 1500 2wd coil spring suspension - 2007 Classic Chevy Silverado 1500 2WD Coil Spring Suspension.
BrandDetroit Axle #ad
ManufacturerDetroit Axle #ad
Height7.95 Inches
Length14.29 Inches
Weight26.86 Pounds
Width12.01 Inches
Part Number80416-10B

4. DLZ

#ad

DLZ 6 Pcs Front Suspension Kit-Upper Control Arm Ball Joint Assembly Lower Ball Joint Sway Bar Compatible With Expedition 1997-2002, F-150 1997-2003 RWD 2WD K8726T K8728T K8772 K8695T

#ad
DLZ #ad - Compatibility information provided is for reference only. Important notice: before placing the order, please check your car model in the Fitment Filter System in the top left corner. Fitment: compatible with 1997-2002 expedition rwd / 2wd; 2004 f-150 heritage rwd / 2wd; 2002 blackwood; 1998-2002 Navigator RWD / 2wd; 1997-2003 f-150 rwd / 2wd; 1998-1999 f-250 rwd / 2WD;.

Interchange part number : 5l3z3085b, mcsoe24, yl2z3050aa, bl5z3050a, f65z5k483cc, f65z3085ab, xl3z5495aa; 2l3z3050aa, 7l5z3050a, mcsoe26, mk8728t, 6l3z5495a, k8772, xl3z3085aa ; 5l3z3084b, f57z3050bb, k8728T, mcsoe1, xl3z3084aa; 2l1z5495aa, k8726t, f65z3084ab, mk8726t, mcf2233, k8695t, ZZP034550C.

Please make sure to match the exact part numbers between this part and the part that you are replacing. Quality & delivery warranty: 1 Year Warranty for all parts you ordered. Package include: both 2 front driver & passenger side upper control Arm & ball joint assembly + both 2 front Lower Suspension Ball Joints, Both 2 Front Driver & Passenger Side Stablizer Sway Bar Links.
BrandDLZ #ad
ManufacturerPartsgoing #ad
Weight0.24 Pounds
Part NumberGPCM-0434971244

5. Detroit Axle

#ad

Sway Bar Links, Detroit Axle, 14PC Front Upper and Lower Ball Joints, Inner and Outer Tie Rods, Pitman Arm, Idler Arm and Tie Rod Adjusting Sleeves for 2000 2001 Dodge Ram 1500-2WD

#ad
Detroit Axle #ad - For - 2000-2001 dodge ram 1500 2WD. Detroit axle suspension parts are ready to meet the rigorous demands of today’s foreign and domestic passenger cars, trucks and SUVs. Kit includes: 2 front upper ball joints + 2 front lower ball joints + 2 sway bar links + 2 Outer Tie Rods + 2Inner Tie Rods + 1Pitman Arm + 1 Idler Arm Assembly + 2 Front Tie Rod Adjusting Sleeve. 10-year Warranty.
BrandDetroit Axle #ad
ManufacturerDetroit Axle #ad
Height35.91 Inches
Length11.42 Inches
Weight30.36 Pounds
Width7.95 Inches
Part Number14S2500116

6. Detroit Axle

#ad

Lower Ball Joints, Sway Stabilizer Bar Links and Outer Tie Rod Kit for 2002 2003 2004 2005 Dodge Ram 1500 2WD, Detroit Axle, 2WD 8pc Front Upper Control Arms w/Ball Joint Assembly

#ad
Detroit Axle #ad - Undergo impact, wear, and fatigue testing to help ensure quality and durability. Check compatibility Chart For Fitment. Built to strict quality control standards. 2002-2005 dodge ram 1500 2WD.
BrandDetroit Axle #ad
ManufacturerDetroit Axle #ad
Height4.41 Inches
Length13.78 Inches
Weight21.95 Pounds
Width5.59 Inches
Part Number80469-8A

7. Orion Motor Tech

#ad

For Most 2WD and 4WD Cars and Light Trucks, Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters

#ad
Orion Motor Tech #ad - Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion. Essential tool for ball joint service - use the orion motor tech ball joint press set ball joint tool / bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm from the vehicle.

If you are not satisfied with this product or if you have any question, please feel free to let us know. Conveniently organized in custom molded case - ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11” x 3” x 15” inch 27. 9cm x 7. 6cm x 38. 1cm plastic blow-molded carrying case with handle for easy storage, safe storage, 1x Installation Adapter, and quick organization. Professional grade quality and durability - off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world.

Universally compatible with a wide range of vehicles - fit most american domestic and imported 2-wheel drive 2wd and 4-wheel drive 4WD cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive 4WD adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle found on Ford, Dodge, GM, IHC and Jeep vehicles. Orion motor tech - we pursue outstanding quality and professional technical support. Package include: 3x receiving tube, 1x removal adapter, 1x Forcing-screw Press, 1x Install Cup Adapter, 1x Screw, 1x Receiving Cup, 1x Installing Cup.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Height3.54 Inches
Length13.98 Inches
Width11.91 Inches
Part NumberOMTCA BJS-0401-00
Model8542035336
Warranty2 Years Warranty, Free Replace or Full Refund

8. Detroit Axle

#ad

Detroit Axle, 2WD Front Upper and Lower Ball Joints Replacement for Chevy Blazer Impala Caprice GMC Envoy S-15 Jimmy Buick Roadmaster

#ad
Detroit Axle #ad - Manufactured in ISO9002 Certified facility. 2 lower ball joints, 2 Upper Ball Joints. Detroit axle suspension control Arms are ready to meet the rigorous demands of today's foreign and domestic passenger cars, trucks and SUVs.
BrandDetroit Axle #ad
ManufacturerDetroit Axle #ad
Height6 Inches
Length6 Inches
Weight5 Pounds
Width6 Inches
Part Number80063-4B

9. Orion Motor Tech

#ad

Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4wd Adapters, for Most 2WD and 4WD Cars and Light Trucks BK

#ad
Orion Motor Tech #ad - All-in-one tool set: 3x receiving tubes, 1x install cup adapter, 1x Screw, 1x Receiving Cup, 1x Forcing-screw Press, 1x Removal Adapter, 1x installation adapter, 1x Installing Cup. Professional-grade durability: constructed from heavy-duty forged steel with black-oxide finished adapters for maximum strength and longevity that resists rust and corrosion to endure years of heavy use.

If you are not satisfied with this product or if you have any questions, please feel free to let us know. Includes a 4wd adapter for service on 1967 - current 1/2 and 3/4 ton 4WD vehicles with the Dana 30 or 44 front axle found on Ford, GM, Dodge, IHC, and Jeep vehicles. Protective carrying case: each component is contained in a heavy-duty plastic carrying case with a handle for safe storage and quick organization.

Easy operation: the orion motor tech ball joint press set with 4x4 adapters effortlessly removes press-fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm. Universal compatibility: fits most american domestic and imported cars and light pickup trucks with press-fit type ball joints.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Height11.61 Inches
Length14.96 Inches
Width3.54 Inches
Part NumberBJS0401BK
Model8542035341