As an Amazon Associate I earn from qualifying purchases.
STO N SHO #ad - 2-piece system consisting of a front plate and a base plate. Removal of the front plate requires only the pull of a spring loaded pull pin. Made to be used with our GoProTM camera mount. Remaining base plate is virtually undetectable when front plate is removed. Made of lightweight aluminum.
PEDAL COMMANDER #ad - Faster acceleration: the pedal commander system eliminates the delay from your electronic gas pedal, allowing your Dodge Charger to accelerate faster, giving your vehicle a night and day difference in performance.
Will not void your warranty: pedal Commander will not void the warranty on your Dodge Charger or leave any trace behind on your ECU. 36 adjustable settings: equipped with 4 different modes: eco, Sport, and Sport +.
Each mode has an additional 9 adjustable settings to fine-tune to your liking, City, making this a must have accessory for your Dodge Charger. Quick & easy installation: pedal commander is a simple plug-and-play system that takes about 6 minutes to install. Now bluetooth compatible so you can control the unit using our free Pedal Commander app.
American Car Craft #ad - 2011-2021 chargers with 392 hemi/ 6. 4l engines r/t Scat Pack SRT. 2012-2014 chrysler 300 SRT models only. 392 6. 4l plenum cover, Perforated Stainless Steel. Fits: 2011-2021 challengers with 392 hemi/ 6. 4l engines r/t scat Pack SRT. 2012-2014 grand cherokee srt models only /392 Hemi/ 6. 4l.
SIR IUS LED #ad - Value pack of 10 piece combo deal of 4x pieces 578 211-2 212-2 41mm festoon led bulbs and 6x pieces 194/168/2825 led bulbs for Most of the USA brand Car and Truck Interior and license Plate light application.
Plug and play for easy installation. Each bulb built with three 3030 high power SMD Chips. Non polarity specific which mean you can plug the bulb in either way and it will work just fine, they are non-canbus LED, if your car require Canbus, they will give you pop up error message.
FREEMOTOR802 #ad - Easy to install - installation can be done easily, no further modification required. Injection molded technology makes the diffuser meet or exceed the OEM quality for long-lasting performance. Providing you an enjoyable shopping experience is our top priority.
Please carefully check the compatibility info and make sure your vehicle model will be correct for this rear diffuser before purchase. Superior durability - made out of high grade PP material, lightweight, wear resistant and impact resistant.
All necessary hardware required for installation are included. Vehicle specific - fits 2015-2016 dodge charger srt only ; 2017-2018 dodge charger daytona, scat pack excluding sxt, r/t, r/t, scat pack & srT Excluding SXT & police trims ; 2020-2022 dodge charger all trims: gt, R/T 392 & SRT ; 2019 Dodge Charger All Trims: GT, scat pack, Police, Scat Pack Widebody and SRT Hellcat Widebody. Enough clips are added to ensure it will hold tightly to the rear bumper.
JKCOVER #ad - Monotonous out the bright red knob covers make the otherwise dull radio and A/C stand out in style. The biggest one is for the air-conditioner and the other smaller ones are for the Volume and the browse enter button. Add brightness for your Challenger/Charger, making driving more enjoyable, Guide becoming directly and clearly although driving at night.
Just push the covers over the right stick knobs and good to go. Double check first the knobs cover fit for dodge challenger / charger 2015 2016 2017 2018 2019 2020 2021; 2015- 2021 Chrysler 300 and Chrysler 300s.
Easy installation and removal within 1 minutes, no needs for tools. Special design made of high quality aluminum alloy, which has great resistance against damage and rusting and will give the original knobs a great protection, moreover you don't need to worry about fingerprint and sliding because of the humanized trellised texture design.
crosselec #ad - Design style - provides a high class and sport decor style for your Dodge Charger/Chrysler 300, change the ordinary interior design of the car and add unique colors, the trim can cover existing scratches and prevent your Ccar from scratch and abrasion.
Material - made of high quality abs plastic material, pattern paint, Three-layer processing:Background paint, Transparent UV in great finished not Real carbon fiber. Satisfaction guarantee - if you're not 100% feel satisfied with your Charger/Chrysler 300, simply return it for a full refund in 30 days, no questions asked money back.
Mishimoto #ad - Mishimoto Lifetime Warranty. Full aluminum construction with durable, TIG-welded end tanks. Direct fit for the 2008, srt, scat pack, 2011-2016 Dodge Challenger R/T 392, and Hellcat.
NDRUSH #ad - Fitment: compatible with 2015 2016 2017 2018 2019 2020 2021 dodge charger Taillight NOTE: just wipe the light when using, do not spray water to the film. Designed with special vinyl channel: adopting special technology allows you to push the liquid and bubbles out easily, no creases in the tint wrap film.
Recommend wrapping the corners with a heat gun or hairdryer to stick better. Give your vehicle blacked out look. 180 days manufacturer warranty since order purchase date, feel free to send email if there's any issue before or after purchase, your case will be taken seriously regardless of warranty period.
The back of the tint kits is adhesive, not easily peel off after go through heavy rain, car wash, extreme heat and cold. Light lens protection: made from the high quality cast vinyl, which makes your tail light scratch-resistant and weather resistant. Package including: 1 pair left right taillight vinyl film + 2 x practice tint overlay + 1 x squeegee +1 microfiber cloth.
1. STO N SHO
#adAnd All 2021 Non Wide Body Dodge Chargers Except SXT, R/T Plus, 2015-2019 Hellcat, Scat Pack, STO N SHO Front License Plate Bracket for 2015-2020 Dodge Charger SRT 392
#adMore information #ad
| Brand | STO N SHO #ad |
| Manufacturer | Sto N Sho #ad |
| Height | 7 Inches |
| Length | 8 Inches |
| Width | 8 Inches |
| Part Number | SNS66f |
| Model | SNS66f |
| Warranty | Limited Lifetime Warranty (Excluding Pull-pin). Pull pin will be warrantied for a period of 1 year (12 months) from the date of purchase. |
More information #ad
2. PEDAL COMMANDER
#adPC31 for Dodge Charger 2007+ SE, Super Bee, SXT, SRT 392, Hellcat 2.7L 3.5L 3.6L 5.7L 6.1L 6.2L 6.4L, Daytona, Scat Pack, R/T, SRT8, PEDAL COMMANDER
#adWill not void your warranty: pedal Commander will not void the warranty on your Dodge Charger or leave any trace behind on your ECU. 36 adjustable settings: equipped with 4 different modes: eco, Sport, and Sport +.
More information #ad
Eco mode gas savings: the pedal commander’s ECO Mode can help increase your Dodge Charger MPG and save you up to 20% in fuel economy. Each mode has an additional 9 adjustable settings to fine-tune to your liking, City, making this a must have accessory for your Dodge Charger. Quick & easy installation: pedal commander is a simple plug-and-play system that takes about 6 minutes to install. Now bluetooth compatible so you can control the unit using our free Pedal Commander app.
| Brand | PEDAL COMMANDER #ad |
| Manufacturer | Pedal Commander #ad |
| Height | 2.5 Inches |
| Length | 1.65 Inches |
| Width | 0.5 Inches |
| Part Number | HD-V666-JVZC |
| Model | HD-V666-JVZC |
More information #ad
3. American Car Craft
#adAmerican Car Craft Plenum Cover for 392 6.4L Engine | Perforated Stainless Steel
#adMore information #ad
| Brand | American Car Craft #ad |
| Manufacturer | American Car Craft #ad |
| Height | 24 Inches |
| Length | 16 Inches |
| Width | 16 Inches |
| Part Number | 153058 |
| Model | 153058 |
More information #ad
4. SIR IUS LED
#adSIR IUS LED N3 578 211-2 212-2 41MM 194 168 2825 Combo LED bulbs white Super Bright 300 Lumens 3030 Chipset for The U.S.A Car Truck Interiors Dome Map Door Courtesy License Plate Lights pack of 10
#adPlug and play for easy installation. Each bulb built with three 3030 high power SMD Chips. Non polarity specific which mean you can plug the bulb in either way and it will work just fine, they are non-canbus LED, if your car require Canbus, they will give you pop up error message.
More information #ad
Give your car pure white super bright light output. Direct replace the original halogen bulb. We offer 1 year warranty if the bulb confirmed to be manufacture defect or shipping damaged. Please make sure they are right bulb size for your specific car.| Brand | SIR IUS LED #ad |
| Manufacturer | SIR IUS LED #ad |
| Part Number | SIRIUSLED-T10-41MM |
More information #ad
5. FREEMOTOR802
#adFREEMOTOR802 Compatible With 2015-2022 Dodge Charger SRT Rear Bumper Diffuser, OE Factory Style Unpainted PP Spoiler Splitter Valance Chin Diffuser Body Kits
#adPlease carefully check the compatibility info and make sure your vehicle model will be correct for this rear diffuser before purchase. Superior durability - made out of high grade PP material, lightweight, wear resistant and impact resistant.
More information #ad
Reliable service - we have researched and developed automotive parts for years. Improved design - 4 shark fins design provides a perfect aerodynamic appearance upgrade to your vehicle. Please place your order without worries. All necessary hardware required for installation are included. Vehicle specific - fits 2015-2016 dodge charger srt only ; 2017-2018 dodge charger daytona, scat pack excluding sxt, r/t, r/t, scat pack & srT Excluding SXT & police trims ; 2020-2022 dodge charger all trims: gt, R/T 392 & SRT ; 2019 Dodge Charger All Trims: GT, scat pack, Police, Scat Pack Widebody and SRT Hellcat Widebody. Enough clips are added to ensure it will hold tightly to the rear bumper.
| Brand | FREEMOTOR802 #ad |
| Weight | 6 Pounds |
| Part Number | BLD-DCHR15SRT-PP |
More information #ad
6. JKCOVER
#adAir Conditioner Volume Radio Trim Rings-3pcs, JKCOVER 2022 Button Knobs Cover Compatible with Dodge Challenger/Charger 2015-2021 2022, Decal Trim Red, Dodge Challenger Charger Accessories
#adJust push the covers over the right stick knobs and good to go. Double check first the knobs cover fit for dodge challenger / charger 2015 2016 2017 2018 2019 2020 2021; 2015- 2021 Chrysler 300 and Chrysler 300s.
More information #ad
Complex modification out there are 3 pieces of the trim covers. Bad attitude service out if you have any problem about the product, We will solve it for you as fast as we can and provide you a great purchasing experience. Easy installation and removal within 1 minutes, no needs for tools. Special design made of high quality aluminum alloy, which has great resistance against damage and rusting and will give the original knobs a great protection, moreover you don't need to worry about fingerprint and sliding because of the humanized trellised texture design.
| Brand | JKCOVER #ad |
| Manufacturer | JKCOVER #ad |
| Height | 2.56 Inches |
| Length | 3.15 Inches |
| Width | 4.33 Inches |
| Part Number | JKC-DODGE-RING-RED |
More information #ad
7. crosselec
#adCrosselec Carbon Fiber Cup Holder Cover Trim Decor Sticker for Dodge Charger 2015-2021/ Chrysler 300 2015-2021
#adMaterial - made of high quality abs plastic material, pattern paint, Three-layer processing:Background paint, Transparent UV in great finished not Real carbon fiber. Satisfaction guarantee - if you're not 100% feel satisfied with your Charger/Chrysler 300, simply return it for a full refund in 30 days, no questions asked money back.
More information #ad
Easy installation - with double-sided adhesive tape, pls cleaning surface with Alcohol, heat the tape by a hair dryer for better adhesion, and press it almost 1 minute. Compatible - perfect fit for 2015 2016 2017 2018 2019 2020 2021 dodge chager/ 2015 2016 2017 2018 2019 2020 2021 Chrysler 300 .| Brand | crosselec #ad |
| Manufacturer | crosselec #ad |
| Part Number | 20CR-DC4-012 |
More information #ad
8. Mishimoto
#adMishimoto MMRAD-SRT-15 Performance Aluminum Radiator Compatible With Dodge Challenger V8 2006+
#adMore information #ad
Increases core thickness by 50% for greater cooling efficiency. Two-row, 1. 96" thick brazed aluminum core, providing ideal fluid temperatures on the street and strip.| Brand | Mishimoto #ad |
| Manufacturer | Mishimoto #ad |
| Height | 1.96 Inches |
| Length | 26.4 Inches |
| Weight | 5.02 Pounds |
| Width | 18.9 Inches |
| Part Number | MMRAD-SRT-15 |
| Model | MMRAD-SRT-15 |
| Warranty | Lifetime Warranty |
More information #ad
9. NDRUSH
#adPrecut Overlays, NDRUSH Blackout Taillight Vinyl Tint Film, Tail Light Wrap Cover Compatible with Dodge Charger 2015 2016 2017 2018 2019 2020 2021
#adRecommend wrapping the corners with a heat gun or hairdryer to stick better. Give your vehicle blacked out look. 180 days manufacturer warranty since order purchase date, feel free to send email if there's any issue before or after purchase, your case will be taken seriously regardless of warranty period.
More information #ad
Easy to install: this is precut tail lamp overlays, no modification or trimming needed, just tear off the film and apply the tint cover to your lights. The back of the tint kits is adhesive, not easily peel off after go through heavy rain, car wash, extreme heat and cold. Light lens protection: made from the high quality cast vinyl, which makes your tail light scratch-resistant and weather resistant. Package including: 1 pair left right taillight vinyl film + 2 x practice tint overlay + 1 x squeegee +1 microfiber cloth.
| Brand | NDRUSH #ad |
| Manufacturer | NDRUSH #ad |
| Part Number | FBARFMP24908 |
More information #ad
