Top 7 Fan Blade for – RV Ventilation

As an Amazon Associate I earn from qualifying purchases.

1. Dumble

#ad

Dumble Fan Blades Replacement with 0.094in D-Bore, 6in White RV Bathroom Fan Blade Replacement Camper Fan Blade

#ad
Dumble #ad - Fits your rv: 6-inch 15. 2cm overall diameter 2-inch x 1. 5-inch / 5. 1cm x 3. 8cm individual blades; 1. 75-inch / 4. 4cm diameter center bore plate; 2/25-inch x 3/25-inch 2mm x 3mm diameter center D-bore hole that is compatible with Elixir, Jensen, Heng's, and Ventline roof vents and range hoods or any 12 Volt motor with a 0.

094-inch D-shaped shaft. Counter-clockwise rotation: this 6 inch fan blade rotates counter-clockwise; To determine the direction of spin on your existing fan, look down through the motor at the top of the blade; If these replacement fan blades rotate in the wrong direction, simply reverse the wires on the motor to change the direction the fan rotates. Built to last: constructed from durable plastic for maximum longevity that resists rust and corrosion; White in color to match your existing fan cover. Goodbye moisture & smells: use the dumble | 6-inch white RV Fan Blades Replacement with D-Bore 1-Pack to rid your RV or camper of lingering smells in the bathroom and built-up moisture.

Easy to install: measure your fan shaft hole diameter and check to see if it is round or d-shaded bore this replacement fan blade has a 2/25-inch x 3/25-inch / 2mm x 3mm D-bore; Determine the desired direction of airflow, carefully pull off the existing fan blades, apply a small amount of lubricant spray or liquid soap on the shaft and in the "hole" of the replacement fan blade, press the new replacement fan blade onto the motor shaft.
BrandDumble #ad
ManufacturerDumble #ad
Height0.8 Inches
Length6 Inches
Weight0.04 Pounds
Width6 Inches
Part Number5593

2. Handylife

#ad

6 inch RV Vent Fan, RV Exhaust Fan with 2 Screws 2 Zip Ties and Template for mounting, Replacement Parts for RV Roof Celling Bathroom Exhaust, 12V D-Shaft RV Fan Motor with White Fan Blade

#ad
Handylife #ad - Long service life: the rv exhaust fan is made of environmentally friendly plastics, which is powerful and quiet, which is durable and corrosion resistant; And the RV celling fan motor has been fully tested, will not disturb your RV life. Easy to install: the rv roof vent fan set comes with 2 screws and a template of where to dirll holes for mounting, the instruction is also included, which is convenient for your installation, just need a simple installation to make the rv roof fan work normally.

Reversible rv vent fan: the direction of rv exhaust fan is reversible, heng's, you can determine the direction by reverse the wires on the motor; the RV bathroom fan is suitable for Ventline pre-1995, Elixir and Jense pre-1995 range hoods roof vents and range hoods or any 12V motor with 0.0094 inch shaft, and the motor is compatible with any similar 6 inch fan blades.

Package includes: 1 x 6inch rv exhaust fan blade, 2 x zip ties, 2 x screws, 1 x 12V RV fan motor, 1 x template; Please compare the size and voltage of this replacement parts with your current RV exhaust fan to ensure it matches. Improve air quality: the 6 inch rv fan blade with 12v d-shaft RV fan motor vent fan is a good ventilation device that exhausts indoor air to the outdoors, which will draw out moisture and odors from the RV, improving air quality for you.
BrandHandylife #ad

3. RUSFOL

#ad

Elixir, fits for Heng's, 2 Pack 6“ Replacement White Vent Fan Blades for RV Bathroom Vent Fan, Ventline and Jensen roof vents and range hoods or any 12 Volt motor with a 0.094-inch round-shaped shaft

#ad
RUSFOL #ad - Long lifespan: the fan blade made of durable plastic which can resist rust and corrosion, and all our blades had been tested before you got it, we care a lot about your device safety. Please compare this unit measurements with your current exhaust fan motors to ensure exact fit.

Dimension: fan shade6”overall diameter :2” x 1. 5” individual blades; 1. 75” diameter center bore plate; 2/25” diameter center round bore hole;. Decide your rotation: the direction of spin is determined by looking down through the motor, at the top of the blade. Compatibility: the 6" fan blade fits for heng's, elixir, ventline pre-1995, and Jensenpre-1995 range hood roof vents and range hoods or any 12 Volt motor with a 0.0

094-inch round-shaped shaft. Keep good air quality: using our fan blades on your RV, can effectively exhaust lingering smells in the bathroom and built-up moisture, provide a healthy environment for you.
BrandRUSFOL #ad
ManufacturerRUSFOL #ad
Part NumberRU027

4. Ventmate

#ad

Ventmate 65484 White 6" Replacement Jensen Fan Blade with 0.125" D-Bore

#ad
Ventmate #ad - Impact resistant plastic. 0125 inch D-bore. 6 inch fan blade for 12 Volt powered roof vents and range hoods. Direction of spin is determined by looking down through the motor at the top of the blade. White color.
BrandVentmate #ad
ManufacturerVentmate #ad
Height1 Inches
Length8.5 Inches
Weight0.12 Pounds
Width7.5 Inches
Part Number65484
Model65484

5. Dorman

#ad

Dorman 620-602 Engine Cooling Fan Blade for Select Models, Black

#ad
Dorman #ad - Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage. Quality construction - manufactured from premium materials for a long service life. Quality tested - has undergone testing to ensure proper fit and performance. Direct replacement - this engine cooling fan blade fits and functions like the original equipment fan blade. Excellent value - original equipment quality at a lower price.
BrandDorman #ad
ManufacturerDorman #ad
Height3.6 Inches
Length20.1 Inches
Weight4.3 Pounds
Width20.1 Inches
Part Number620-602
Model620-602
WarrantyLimited Lifetime Warranty

6. AISIN

#ad

AISIN FNT-011 Engine Cooling Fan Blade

#ad
AISIN #ad - Engineered to exact oe specifications. Higher in performance. Fit type: Vehicle Specific. Produced with high quality materials and state of the art technology. Lighter in weight.
BrandAISIN #ad
ManufacturerAISIN #ad
Height4.02 Inches
Length24.09 Inches
Weight2.51 Pounds
Width23.94 Inches
Part NumberFNT-011
ModelFNT-011

7. Derale

#ad

Derale 17117 Heavy Duty Fan Blade Series 1000 17" Steel Clutch Fan Standard Rotation , Black

#ad
Derale #ad - Black powder coated finish. Maximum full-time airflow. Steel fan blades. 17 inch standard rotation design.
BrandDerale #ad
ManufacturerDerale #ad
Height2.75 Inches
Length21.38 Inches
Weight4 Pounds
Width18.25 Inches
Part Number17117
Model17117
WarrantyLimited One Year