1. Smittybilt
#ad
Smittybilt 76856-01 XRC Rear Bumper with Hitch and Tire Carrier for Jeep JK, Box 1 of 2
#adSmittybilt #ad - Package height : 4064 cm. Package length : 167. 640 cm. Fit type: Vehicle Specific. Package width : 63. 5 cm.More information #ad
Brand | Smittybilt #ad |
Manufacturer | Smittybilt #ad |
Height | 21 Inches |
Length | 69 Inches |
Weight | 52 Pounds |
Width | 20 Inches |
Part Number | 76856-01 |
Model | 76856-01 |
Warranty | See Rep |
More information #ad
2. Smittybilt
#ad
Smittybilt 76855 XRC Textured Black Rear Bumper with 2" Receiver Hitch and D-Ring Mounts
#adSmittybilt #ad - Features a 2-inch class iii tow rated receiver hitch and two D-ring mounts D-rings not included. Do not use any type of cleaners that contain abrasives that may damage the finish of your part.More information #ad
Made from 3/16 cold rolled steel and then robotically welded to the exact specifications. Two stage matte Black powder coat finish. 2 and 4-door models.Brand | Smittybilt #ad |
Manufacturer | Smittybilt #ad |
Height | 20 Inches |
Length | 69 Inches |
Weight | 107 Pounds |
Width | 14 Inches |
Part Number | 76855 |
Model | 76855 |
Warranty | Limited WarrantiesSmittybilt products are covered under the following limited warranties only. Note that the duration of the limited warranty differs according to the material and finish of the product purchased. Subject to the duration and conditions of the limited warranty stated below, Smittybilt warrants to the original retail purchaser that its products are free from defects in material and workmanship. All other warranties and representations express or implied are hereby disclaimed, including fitness for merchantability and buyer's intended use or purpose. All parts are sold “AS IS” except for the limited warranties granted herein. Buyer assumes all risks as to the selection, suitability and performance of all goods and products selected. This limited warranty does not cover damage or impairment in any part due to misuse, improper installation, accident or contact with on-road or off-road hazards, product modification, improper or inadequate cleaning and/or maintenance. 1. Limited Lifetime Warranty on Stainless Steel Products - Smittybilt stainless steel products carry the foregoing limited repair or replacement warranty against workmanship and defects in the material so long as the original purchaser retains the original stainless steel parts. 2. Limited Five (5) Year / 50,000 Mile Pro-Rata Warranty (whichever occurs first) on Dual-Stage Powder Coating Products - Smittybilt dual-stage powder coated products carry the foregoing limited repair or replacement warranty for a period of (5) years or 50,000 miles (whichever occurs first) from date of purchase against workmanship and defects in the material, provided that any claim submitted after (2.5) years from date of purchase shall, if accepted, be satisfied by Smittybilt offering customer a credit on the purchase of a replacement product equal to fifty percent (50%) of customer's initial purchase price. 3. Limited Three (3) Year / 36,000 Mile Pro-Rata Warranty (whichever occurs first) on Chrome Products |
More information #ad
3. Smittybilt
#ad
Smittybilt 76856 XRC Black Textured Rear Bumper with Hitch and Tire Carrier for Jeep Wrangler/Wrangler Unlimited
#adSmittybilt #ad - 5-year limited warranty. Fits 2007 to 2016 jk wrangler, Rubicon and Unlimited. 2 and 4-door models. Black powder coat. 1-1/4” grade 5 mounting hardware.More information #ad
Features pressed tapered 2” diameter bearings, reinforced double sided gussets. Manufactured from 3/16” cold rolled steel and then robotically welded to the exact specifications.Brand | Smittybilt #ad |
Manufacturer | Smittybilt #ad |
Height | 28 Inches |
Length | 66 Inches |
Weight | 173 Pounds |
Width | 17 Inches |
Part Number | 76856 |
Model | 76856 |
Warranty | 5-Year limited |
More information #ad
4. Smittybilt
#ad
Smittybilt 76858 XRC Gen 2 Rear Bumper for Jeep Wrangler
#adSmittybilt #ad - Auxilliary back up light cutouts, LED lights included. Frame pivot point. Roto pax gas/water can mount. Bottle opene. Single-handed opening operation Tuned to factory tailgate.More information #ad
Cb and jack mount. Bolt-on design tire carrier Fits SRC, XRC and Factory Tenth Anniversary. Jeep bumpers. Hdpe slip strips the ultimate fender-to-fender protection for rock crawling. Class iii hitch Anti-rattle provision.Brand | Smittybilt #ad |
Manufacturer | Smittybilt #ad |
Height | 14 Inches |
Length | 69 Inches |
Weight | 107 Pounds |
Width | 20 Inches |
Part Number | 76858 |
Model | 76858 |
More information #ad
5. Rugged Ridge
#ad
Body Width for 2007-2018 Jeep Wrangler JK/JKU, Rugged Ridge 11548.21 Textured Black Spartan Rear Bumper
#adRugged Ridge #ad - Bolt on replacement: this rear bumper includes integrated shackle plates that anchor to the frame for solid vehicle recovery and also includes installation hardware; works with factory JK tow hitch. We offer steel winches, synthetic rope or deep water snorkels & more recovery accessories.Spartan rear bumper: the one piece design features a body width profile and sturdy all steel construction; features a recess that provides additional clearance for larger wheels and tires.
More information #ad
Five year warranty: our rugged ridge products are covered by industry leading 5 year warranty and Rugged Ridge Floor Liners have Limited Lifetime Warranties providing customers with repair or replacements subject to certain common exclusions. Rugged ridge jeep parts: count on rugged ridge to provide you with proven Jeep parts and accessories like bumpers, lift kits, wheels, interior accessories, floor liners and more for varying Jeep models. Off road accessories: get serious about off-roading with a variety of tow hooks, hitches, snorkel kits & more that give yourself a way out in sticky situations.
Brand | Rugged Ridge #ad |
Manufacturer | Rugged Ridge #ad |
Height | 8.75 Inches |
Length | 77.75 Inches |
Weight | 15 Pounds |
Width | 15 Inches |
Part Number | 11548.21 |
Model | 11548.21 |
Warranty | Manufacturer Warranty |
More information #ad
6. Smittybilt
#ad
Smittybilt 76732 Stryker Rear Bumper for Jeep JK
#adSmittybilt #ad - Removable mesh panels for customization. Integrated d-ring and lift point fits up to 7/8" D-rings. Auxiliary backup light cut outs. Raised corners for increased departure angles. 3mm deep drawn formed steel.More information #ad
Brand | Smittybilt #ad |
Manufacturer | Smittybilt #ad |
Height | 14 Inches |
Length | 69 Inches |
Weight | 107 Pounds |
Width | 20 Inches |
Part Number | 76732 |
Model | 76732 |
Warranty | Lifetime Structural And 5 Year Finish |
More information #ad
7. u-Box
#ad
Rear Bumper w/Spare Tire Carrier & Oil Drum Rack Bar & Receiver Hitches for 2007-2018 Jeep Wrangler JK & Wrangler JK Unlimited
#adu-Box #ad - Two-stage textured Matte Black Finish;Bolt-on Skid Plate. Welds on the inside and out!18w LED accent lighting. Weight: 167 lbs; can accommodate Up to a 37" Tire;Can be installed double oil drums.More information #ad
Manufactured from cold rolled steel;Marine Grade Stainless Steel Hardware. 2 year manufacturer Warranty and Lifetime Customer Service.Brand | u-Box #ad |
Manufacturer | u-Box #ad |
Weight | 167 Pounds |
Part Number | SH-BUMPER-070-1 |
More information #ad
8. YITAMOTOR
#ad
YITAMOTOR Rock Crawler Rear Bumper Compatible with 07-18 Jeep Wrangler JK Unlimited with D-Ring, 2" Hitch Receiver, Textured Black
#adYITAMOTOR #ad - Simple bolt-on installation-the rock crawler rear bumper was smartly engineered to be a direct bolt-on solution for trail headed Cars. Include two 4. Heavy steel for maximum protection-this rear Bumper is constructed from heavy duty 5/32 inches steel to keep the body of your car protected from impacts in the harsh off-road environment.Fit type: Vehicle Specific. In additional, the rear bumper also include a 2" receiver hitch for towing.
More information #ad
75 ton d-rings, the total capacity is 9000 lbs. Professional installation recommended. Application-compatible with 2007-2018 jeep Wrangler JK and JK Unlimited models, include 2-door and 4-door models. Corrosion resistance finish-this bumper for wrangler JK is finished with a e-coat and a powder coat, it will never get rusted even the coat off. As a direct fit replacement, welding, this Rear Bumper uses all factory mounting points and requires no additional cutting, or fabrication for installation. Shackle mount and d-rings-two solid d-ring shackle mounts are welded into the rear bumper from the inside and outside for increasing strength.
Brand | YITAMOTOR #ad |
Manufacturer | YITAMOTOR #ad |
Height | 17 Inches |
Length | 65.36 Inches |
Width | 12 Inches |
Part Number | ATYJ0101 |
Model | Rock Crawler Rear Bumper |
Warranty | 90 days manufacturer |
More information #ad
9. Hooke Road
#ad
Hooke Road Wrangler JK Rear Bumper with Tire Carrier and Front Bumper Combo Compatible with Jeep Wrangler JK & Unlimited 2007-2018 2/4 Doors
#adHooke Road #ad - Rated included. Heavy duty construction & corrosion resistance finish - the bumpers are manufactured from durable 5/32" steel sheet and 2"X0120" steel tubing. Easy bolt-on installation - desiged to be a direct bolt-on aftermarket bumper using just basic hand tools, no drilling or cutting required for a clean straight forward installation.Winch not included. Two stage finish using E-Coat pre-coating and high-grade textured black powder coating for long lasting corrosion resistance.
More information #ad
Rear bumper built-in hitch receiver for up to 9500 lb. Tire carrier can accommodate up to a 37" tire. Fitment - hooke road front and rear bumper combo compatible with Jeep Wrangler JK & Unlimited 2007-2018 2/4 Doors. Installation instruction included. Package include - 1 x wrangler jk front bumper; 1 x wrangler jk rear bumper; 4 x D-rings; All mounting hardware. 4. 75 ton capacity D-rings 9500lb. Front bumper built-in winch plate for up to 12, 000 lb. Winch plate & hitch receiver & tire carrier & d-rings - two solid d-ring shackle mounts are welded into bumpers from the inside and outside for increasing strength.
Brand | Hooke Road #ad |
Manufacturer | Hooke Road #ad |
Weight | 9500 Pounds |
Part Number | Z.BXG-143+114AB |
Warranty | 2 Year Manufacturer Warranty |
More information #ad
10. Smittybilt
#ad
Smittybilt 76653 XRC Textured Black Rear Bumper for Jeep Wrangler/Wrangler Unlimited
#adSmittybilt #ad - Solid d-ring mounts welded inside and out. Class iii 2 inch receiver hitch included. Manufactured out of 3/16 inch thick cold rolled solid plate. E-coat undercoated, dual stage textured black matte powder coat. Optional swing away tire carrier can be added at any time.More information #ad
Brand | Smittybilt #ad |
Manufacturer | Smittybilt #ad |
Height | 16 Inches |
Length | 68 Inches |
Weight | 70 Pounds |
Width | 12 Inches |
Part Number | 76653 |
Model | 76653 |
Warranty | 5-Year limited |
More information #ad