Top 10 Universal Muffler Clamp – Automotive Replacement Exhaust Pipes

As an Amazon Associate I earn from qualifying purchases.

1. Pilot Automotive

#ad

And Trucks, Matte Black Powdercoat, DC Sports EX-1012B Performance Bolt-On Resonated Muffler Slant Tip with Clamps and Adapters for Fitment on Most Cars, Sedans

#ad
Pilot Automotive #ad - It has a 3-bolt clamp system for easy installation. 100 percent stainless steel with Flat Black Finish. 3 bolt clamping system, inlet: 2. 25 inch, Outlet: 3.

75 inch, length: 9 inch. Affordable performance: the exhaust tip is designed to boost the intensity of the exhaust notes. It has a straight-through design for top power output. Fits 1. 5” to 2” diameter Piping. Design: the multiple point clamp-on exhaust is made using t304 stainless steel that resists corrosion. Cut type: Slant Cut. Slanted tip shape. The exhaust tip is TIG-welded by hand. Product dimensions: 2-1/4in inlet x 3-3/4in outlet x 9in long. It helps to create a more aggressive sound while adding a sporty look to your vehicle. Resonated tips are to enhance sound output.
BrandPilot Automotive #ad
ManufacturerDC Sports #ad
Height2.25 Inches
Length9 Inches
Weight1.55 Pounds
Width3.75 Inches
Part NumberEX-1012B
ModelEX-1012B

2. RULLINE

#ad

Lap Joint+Bolts Band Flanges Clamp Stainless Steel Universal Compatible with Muffler Downpipe Catback Pipe Connector, Ruien 2 inch Hardware Exhaust Clamp

#ad
RULLINE #ad - Brilliant sealing: superior Sealing capability prevent Exhaust gas and Noise from Leaking, Tight but without distoring the pipe. Easy installation: Easy to install without welding and drilling, Removable and Reusable. Suitable size: id: 2"/51mm + overall Length 3. 74"/95mm. Durable material: thickened and widened stainless steel for long service life, Rust prevention, Anti-Corrosion, Clean and Bright Apperance. Universal fitment: fit for 2" id tube perfect for Catback, Exhausts, Mufflers, Downpipes of most car model such as VW Audi etc.
BrandRULLINE #ad
ManufacturerRULLINE #ad
Part NumberUS-TTP073
ModelUS-TTP073

3. DC Sports

#ad

And Trucks, Polished Stainless Steel, DC Sports EX-5016 Performance Bolt-On Resonated Exhaust Muffler with Clamps and Adapters for Universal Fitment on Most Cars, Sedans

#ad
DC Sports #ad - Dimensions: 2. 25” inlet, 3. 25” outlet, 16. 25” long. Reduces back pressure for added horsepower and torque. Made from 100% polished stainless steel. Adds a deep, resonant sound.
BrandDC Sports #ad
ManufacturerPilot Automotive #ad
Height6 Inches
Length21.4 Inches
Weight2.77 Pounds
Width6.5 Inches
Part NumberEX-5016
ModelEX-5016

4. DC Sports

#ad

And Trucks, Polished Stainless Steel, Sedans, DC Sports EX-1013 Performance Bolt-On Resonated Muffler Slant Exhaust Tip with Clamps and Adapters for Universal Fitment on Most Cars

#ad
DC Sports #ad - Polished silver finish. 3 bolt clamping System. Easy install, bolts on in minutes. Resonated to enhance sound. Note:to install you simply loosen the three bolts and tighten around the factory exhaust pipe. Adds visual appeal. Fits- 1. 75-2. 5 inch Piping.
BrandDC Sports #ad
ManufacturerPilot Automotive #ad
Height9 Inches
Length4 Inches
Weight1.55 Pounds
Width4 Inches
Part NumberEX-1013
ModelEX-1013

5. DC Sports

#ad

DC Sports EX-5015 Performance Bolt-On Resonated Exhaust Muffler with Clamps and Adapters for Universal Fitment on Most Cars, and Trucks, Polished Stainless Steel, Sedans

#ad
DC Sports #ad - Easy bolt-on clamping system can be installed in minutes. Made from 100% polished stainless steel for durable luster. Slant cut outlet for an aggressive profile. Fits: 2. 5 inch. Dimensions: 2. 5" intake x 4" outlet x 21. 5" length. Adds a deep, resonant throatiness to exhaust sonics and an aesthetic focal point to rear of vehicle.
BrandDC Sports #ad
ManufacturerPilot Automotive #ad
Height5.9 Inches
Length21.6 Inches
Weight6 Pounds
Width6.1 Inches
Part NumberEX-5015
ModelEX-5015

6. AMAAM

#ad

Heavy Duty Saddle Style U-Bolt Muffler Clamps with Anti-Rust Coat and Multiple Uses 2 1/2"

#ad
AMAAM #ad - Multiple uses with numerous sizes to choose from. Made from steel with anti-rust coating. Heavy duty u-bolt exhaust saddle style clamp. Includes saddle, u-bolt, & two nuts. Diameter shown is inside diameter ID which fits over the pipe.
BrandAMAAM #ad
ManufacturerAfter Market Auto & More #ad
Part Number77000

7. TOTALFLOW

#ad

TOTALFLOW Natural Finish 1.5" TF-U150 304 Stainless Steel Saddle U-Bolt Exhaust Muffler Clamp-1.5 Inch

#ad
TOTALFLOW #ad - 5". Totalflow is a usa - California based company. Available in a wide range of styles and sizes. Check product details below for other sizes. Saddle u-bolt exhaust muffler clamp 1. 304 stainless Steel Construction. Made from heavy gauge material. Seal muffler Inlets, elbow joints, outlets, pipe.
BrandTOTALFLOW #ad
ManufacturerTOTALFLOW #ad
Height2.88 Inches
Length3.25 Inches
Weight0.34 Pounds
Width0.63 Inches
Part NumberTF-U150
ModelTF-U150
WarrantyOne (1) Year Limited Warranty for parts purchased from authorized dealers ONLY, for list of authorized dealers please check the manufacture website: TOTALFLOW warrants the products mentioned above against defects in materials and workmanship for the period set forth below, when they are owned by the original purchaser and remain installed on the vehicle on which they were originally installed. This warranty is void if the product was not installed properly on the vehicle, was installed on a vehicle for which it was not designed, or was removed from the vehicle on which it was originally installed and reinstalled on another vehicle. This warranty shall not apply to normal wear, including interior/exterior sound levels, cosmetic issues such as coatings and material discoloration, any product that was installed on a racing vehicle, installed improperly or contrary to TOTALFLOW instructions, altered, misused, repaired, damaged from an accident, collision, undercarriage road impact or debris, or willful or neglige

8. Qiilu

#ad

Qiilu 2.5 Inch Exhaust Band Clamp Stainless Steel Lap Joint Exhaust Band Clamp Universal for Muffler Catback Pipe Connector with Bolts

#ad
Qiilu #ad - Buy with confidence! we offer the 365-day warranty and lifetime support. Easy installation, comes with high strength bolts, great torsion and not easy to loosen, can be installed and dismounted for many times.

If you have any question on use, kindly contact us at any time directly, we will solve the problem for you within 24 hours on weekdays. Removable and Reusable. Made of premium stainless steel, cnC precision machined, anti-oxidation and solid for long time use, strong acid and alkali resistant, shiny surface with with no burr. Universal fit for 2. 0" id tube perfect for catback, Exhausts, Mufflers, Downpipes of most car model such as Audi etc. Superior sealing capability prevent Exhaust gas and noise from leaking, tight but without distoring the pipe, makes it easy to install and remove exhaust systems and turbo parts. Kindly check your tubes inner diameter before you buy! .
BrandQiilu #ad
ManufacturerQiilu #ad
Part NumberYP-QC05161-FBA

9. Yosoo

#ad

Yosoo Universal Motorcycle Exhaust Muffler Pipe Bracket Clip Fasten Support Silencer Pipe Bracket Hanger Band

#ad
Yosoo #ad - Fit most motorcycles: This motorcycle semicircle is suitable for most motorcycle and very easy to install. Material: this exhaust pipe Bracket is made of high quality stainless steel and rubber, sturdy and durable. Size: hanger mount bracket size: 5. 71x5. 04x095inch/14. 5x12. 8x2. 4cm; belt size: 12. 60x1. 06inch/32x2. 7cm. Color: in black and silver color, delicate and elegant. Exhaust muffler silencer pipe hanger mount bracket: Hang your exhaust muffler pipe easily, convenient and practical.
BrandYosoo #ad
ManufacturerYosoo #ad
Part NumberYosoo

10. LTI-DIRECT

#ad

LTI Universal 2.5 inch Narrow Exhaust Band Seal Clamp Muffler Pipes Exhaust Manifold Repair Clamp Connect Stainless Steel 2 Pack 2.5"

#ad
LTI-DIRECT #ad - Size: joins 2. 5" od pipe to 2. 5" id pipe, these clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. Unique seal and high clamp loads are provided without distorting your exhaust components, effective way to connect exhaust system components such as pipes, allowing the flexibility to disassemble for service.

Our product is a pre-formed ring, typically stainless, has been tested for strength and are reusable without damaging the pipes. Seal exhaust band clamps is a simple, mufflers and catalytic converters. The narrow band clamp add the mild steel semi-circular gasket parts, it can hold the pipe tightly without loosening. 30 days free return no questioN ASK! We value your shopping experience and strive to offer a high-quality product and service.

Distributes the clamping force evenly over the entire 360° to prevent leaks and control material distortion. Application: exhaust clamp is the muffler repair parts, can also be used for Catalytic Converter, can be called muffler clamp or narrow strap clamp. Lti-direct provide 12-month warranty. The i-shape block again enhances the sealing of the joined exhaust components. The band clamp is a wide strap of metal, can easily disassemble and install them also This exhaust clamp is adjustable, which wraps around the exhaust pipe joint.
BrandLTI-DIRECT #ad
ManufacturerLTI-DIRECT #ad