Top 10 Transponder Holder for Car – Visor Accessories

As an Amazon Associate I earn from qualifying purchases.

1. JL Safety

#ad

Indestructible Holder fits Mini and OLD size EZ Pass not the Flex or HOV switch models, I Pass, PalPass hard case and FasTrak transponders. Holder only. Made in USA, I Zoom, JL Safety EZ Pass-Port

#ad
JL Safety #ad - Unbreakable. Lifetime warranty. Compact design, easily tucked behind mirror, and will not block driving sight. Will never melt, deform, discolor, break, or rattle. Easy to Install & Remove. Made in USA. Fits old & new i-pass, quickpass, ez-pass not hov switch models, PalPass, FasTrak & others in pics. Single industrial grade suction cup for extreme hot & cold condition.
BrandJL Safety #ad
ManufacturerJL Safety #ad
Height1.5 Inches
Length2 Inches
Weight0.04 Pounds
Width2.25 Inches
Part NumberEZP300
ModelEZP300

2. USCAN

#ad

Clear, EZ Pass Toll Tag Holder,Fits New & Old Transponder,i-Pass,i-Zoom

#ad
USCAN #ad - Its large suction cups securely hold the tag in place. Without using permanent adhesive strips. E-z mount easily removes for cleaning the windshield, or when you are switching to another vehicle or when you just don't need it.

Not for use with EZ Pass Flex, FasTrak. Easy to put it on! easy to remove it! Slip the Tag into the E-Z Mount and stick it to the windshield with the suction cups. For use with both the new smaller kapsch Model 801660A-TAB and the original Mark IV transponder See back of unit Please check compatibility. No adhesive necessary. The best way to attach your ez pass Toll Tag to the windshield of your Car, RV, Truck, or Motorcycle. Suitable for the following states: nj ny pa de il in oh va wv md ma ri nh sc fl and i-pass c-pass palmetto pass.
BrandUSCAN #ad
ManufacturerUSCAN #ad
Weight0.1 Pounds
Part Number3013100605
Model8542107539

3. YiePhiot

#ad

YiePhiot EZ Pass Holder, Rubber Mounting Strap Holder Suction Cup Mount, IPass Tag Transponder Holder Toll Pass Windshield Mount, IZoom

#ad
YiePhiot #ad - Very easy to install, attach the holder in just 5 seconds with suction cup and it is super easy to remove. You can adjustable neck with 360 degrees rotating holder, easy to install and easy to use. Fits all major toll pass holder: new york, maine, maryland, Vermont, Pennsylvania, Illinois, Massachusetts, South Carolina, Delaware, New Jersey, Indiana and Virginia. The strap can adjustable, and good elasticity, tensile resistance and long service life. We are equipped with 3m double sided adhesive tapes Can make your EZ Pass more stable, you can use it according to the situation.
BrandYiePhiot #ad
ManufacturerYiePhiot #ad
Part NumberEZ-BD
ModelEZ-BD

4. AUTOBOXCLUB

#ad

1 PACK, EZ Pass Holder, IPass Holder/Toll Pass Holder for Most US States/Toll Pass Windshield Mount/Easy to Install and Remove/with 4pcs Toll Pass Mounting Strips/UV-Protective CLEAR

#ad
AUTOBOXCLUB #ad - Great value - 4pcs reclosable Mounting strips are INCLUDED $6. 00 value. Plus, they are 100% UV Protective! / U. S patented. All new 2020 toll pass holder - our new 2020 holders are now stronger than before! The flexible base allows you to easily remove the holder from the windshield without breaking it.

Attach in just seconds - with suction cups which even come with RELEASE TABS so it is super easy to remove. 100% satisfaction guarantee - Our holders are backed by 100% guarantee that you are fully satisfied with your product. Fits all major toll passes - old and new ez pass, massachusetts, maine, pennsylvania, i-pass, elite pass, Ohio, I-Zoom, Fast Lane with HOV switch, South Carolina, New Jersey, FasTrak, Vermont, prepass including: new york, Delaware, Illinois, Quick Pass, Maryland, Indiana and Virginia.
BrandAUTOBOXCLUB #ad
ManufacturerAUTOBOXCLUB #ad
Part NumberSH-048-050-PP
Model5

5. Free Thought Designs

#ad

Free Thought Designs Toll Transponder Holder for New I-Pass and EZ Pass 3 Point Mount 1 Pack

#ad
Free Thought Designs #ad - You don't have to remove velcro from your unit. Does not rattle. Can withstand high heat. Fits new/smaller ez-pass and I-Pass 3. 5"x2" with or without adhesive strips. 3 point suction Cup Mount.
BrandFree Thought Designs #ad
ManufacturerFree Thought Designs #ad
Part NumberTOLL10GEN1BK

6. NPoint

#ad

EZ Pass Holder. Black Toll Pass Holder Super Strong Holder with Suction Cups Holds Tightly to Your Car Windshield

#ad
NPoint #ad - Fit – the ez pass holder was made to fit the new size ez pass holders for the states of; new york, Maine, Virginia, New Jersey, Pennsylvania, Delaware, New Hampshire, Illinois, Ohio, Maryland, Massachusetts, Rhode Island, West Virginia and any other state with a similar size EZ Pass transponder.

Package contents – 1 ez pass holder color: black and 3 suction cups. Design – our ez pass holders were designed so that you can transfer your ez pass from vehicle to vehicle without leaving any Velcro residue everywhere. Quality – made out of premium abs plastic materials making it a long-life product to serve you for all your EZ Pass holder needs for years to come. This policy was put in place to ensure that you are fully satisfied with our product or receive your money back no questions asked, so go ahead and try our EZ Pass holders now, RISK FREE!! Manufactured for Neust Automotive accessories.

100% money-back guarantee - our ez pass holders are backed by 100% customer satisfaction Guarantee Policy. It also comes along with three suction cups that mount nicely to your windshield and will stay there unless its physically removed. The suction cups that come with is are made of high-grade rubber and will stick to your windshield without any issues. Especially ideal to use for rental cars and easily removable to prevent theft.
BrandNPoint #ad
ManufacturerNeust #ad
Height1.4 Inches
Length4 Inches
Weight0.01 Pounds
Width2.5 Inches
Part Number92219

7. eZpassClip

#ad

EZpassClip New EZ Pass Holder for New, Small Toll Tag Transponder Black

#ad
eZpassClip #ad - Simply slide up your electronic toll tag and you're done! Ezpassclip is proudly made in the USA of high density, UV resilient plastic.

Remove any velcro attached to your toll tag, dampen the suction cups if needed, and attach to a convenient location on your windshield. Available in either black or white. Your ezpassclip is ready to use. Ezpassclip makes it easy to use your electronic toll tag in multiple vehicles or simply remove it to prevent theft. Ezpassclip is your mounting solution for the new-style transponder. Slide your toll tag up from the bottom and you're ready to go. Ezpassclip mounts with two suction cups to your windshield.
BrandeZpassClip #ad
ManufacturerNuCorp17 Inc. #ad
Part NumberPart #813
ModelPart #813

8. JZMYXA

#ad

JZMYXA Toll Pass Holder, Reclosable Mounting Strips Included, I-Pass, I-Zoom, E-Z Pass, Fits New & Old Transponder, Windshield Mount Holder

#ad
JZMYXA #ad - Holder dimension: 3. 9 inches x 3. 45 inches. Long lasting - this solves the problem of mounting strips peeling off, sticking onto the windshield when you do not want it etc. The suction cups it uses are cutting edge and perfect for you.

Creativity meets quality - decorative adhesive decal is a new way to personalize your vehicle even if you don't own a toll pass! Plus the clear material is easy to maintain while expressing your unique personality. Easy to install and remove - Attach the holder in just 5 seconds with suction cups so it is super easy to remove. Inexpensive - this is inexpensive and simple way to express your personality. Fits all major toll pass holder - including: new york, vermont, Massachusetts, New Jersey, Delaware, Maine, Illinois, Pennsylvania, Maryland, South Carolina, Indiana and VirginiaAny toll pass that measures smaller than our holder will work.
BrandJZMYXA #ad
ManufacturerJZMYXA #ad
Height0.5 Inches
Length3.9 Inches
Width3.45 Inches
Part Number8542111887
Model8542111887

9. JL Safety

#ad

One Suction Cup, PalPass, QuickPass & FasTrak Transponders. Compact, UNBREAKABLE Electronic Toll Pass Tag Holder. EZ Pass-Port, Tough & Made in USA, for Old & New EZ Pass not HOV switch model, IPass

#ad
JL Safety #ad - No adhesive needed. Made from steel to handle extreme temperatures. Will never melt, break, or deform. Made in USA. Slip-fit that tightly and gently holds your old or new transponder not Flex in place. Industrial grade suction cup that holds through the hot and cold conditions. Easily install and remove your transponder when needed. Will not spin, deform, rattle, discolor, or bend.
BrandJL Safety #ad
ManufacturerJL Safety #ad
Height1.5 Inches
Length2 Inches
Weight0.04 Pounds
Width2.25 Inches
ModelEZP300

10. eZpassClip

#ad

Smaller EZ-Pass and Smaller I-Pass Toll Tag Transponders White, eZpassClip New EZ Pass Holder for New

#ad
eZpassClip #ad - Ezpassclip is your mounting solution for the new-style transponder. Ezpassclip mounts with two suction cups to your windshield. Available in either black or white.

Remove any velcro attached to your toll tag, dampen the suction cups if needed, and attach to a convenient location on your windshield. Simply slide up your electronic toll tag and you're done! Ezpassclip is proudly made in the USA of high density, UV resilient plastic. Ezpassclip makes it easy to use your electronic toll tag in multiple vehicles or simply remove it to prevent theft. Slide your toll tag up from the bottom and you're ready to go. Your ezpassclip is ready to use.
BrandeZpassClip #ad
ManufacturerNuCorp17 Inc. #ad
Part NumberPart #814
Model13