Top 10 Starter Heat Shield Wrap – Automotive Replacement Exhaust Heat Shields

As an Amazon Associate I earn from qualifying purchases.

1. Design Engineering

#ad

Design Engineering 010402 Versa-Shield 7" x 24" Starter Heat Shield Wrap

#adDesign Engineering #ad - Withstands 500 degrees fahrenheit of direct heat and 2000 degrees Fahrenheit of radiant heat. 7-inch wide 24-Inch long. Additional uses include protecting master cylinders, cool cans, fuel pumps, distributors, and more. Protect your starters from potential failure caused by under-hood heat soak conditions. Easy to install with hook & loop closure system - no need to remove starter for installation. Constructed using an aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier.

Brand	Design Engineering #ad
Manufacturer	Design Engineering #ad
Height	11 Inches
Length	8.25 Inches
Weight	0.35 Pounds
Width	1.25 Inches
Part Number	10402
Model	10402
Warranty	DEI warrants to the original retail purchaser with proof of purchase for warranty determination that its products are free from defects in material and workmanship while purchaser owns the vehicle upon which such product(s) were originally installed. DEI’s obligation under this warranty shall be limited to the repair or replacement of parts that are determined by DEI to be defective, or refund of the products original purchase price, at DEI’s option, of the alleged defective product. We pledge that if at any time you encounter a problem with our products, we will strive to correct the problem in the most timely and efficient way possible, subject to the terms, conditions, and Limitations contained herein.

2. Thermal Zero

#ad

Thermal Zero, Universal Starter Heat Shield Barrier Blanket, prevents premature starter failure, Fits starters on Chevrolet, Ford, Big Block engines and many more., Small Block, Chrysler

#adThermal Zero #ad - Simple, easy to install heat shield wrap with an extremely effective radiant heat reflective surface. Aluminized layer reflects over 90% of radiant heat up to 2000°F allowing the starter to last longer. Very thick aluminized insulation helps to eliminate intermittent starter failure due to radiant heat. Inexpensive, durable solution for starters solenoids that overheat due to exhaust in close proximity. Proudly manufactured in the USA. Material can easily be cut to fit most all starters.

Brand	Thermal Zero #ad
Manufacturer	Thermal Zero #ad
Height	1.5 Inches
Length	8 Inches
Width	4.5 Inches
Part Number	USHB
Model	USHB

3. SWI

#ad

SWI PARTS Aluminum and fiberglasss heat shielding Universal Starter heat shield 7 X 24 in Wrap Self Attaching

#adSWI #ad - Material: aluminum heat shielding on one side and heat blanketing material fiberglasss. Non-conductive strap-on heat shield with a highly-reflective mylar surface.

The starter heat shield will reflect over 90 per cent of radiant heat up to 2000 degrees Fahrenheit adding life to the starter and assuring reliable starts. The starter heat shield is a universal kit that fits all starters; Help prevent starter failure caused by overheating, Prolong your starter's life and improve its performance, Contains no asbestos, and Easy Installation. Universal starter heat shield 7 X 24 in Wrap Self-Attaching.

Brand	SWI #ad
Manufacturer	SW INDUSTRIAL #ad
Weight	0.2 Pounds
Part Number	SW-AS724-1

4. Thermo-Tec

#ad

Silver, Thermo-Tec 14150 Starter Heat Shield, 7" x 22"

#adThermo-Tec #ad - Offers up to 2000 degrees Fahrenheit of radiant heat protection. Protect your starter from damaging heat that destroys the windings of the starter and solenoid. Non-conductive heat shield with a highly-reflective Mylar surface. Reflects over 90% of radiant heat, adding life to the starter and assuring reliable starts. The universal fit is easy to install with included SnapStrap fasteners - no need to remove starter. Fit type: Vehicle Specific.

Brand	Thermo-Tec #ad
Manufacturer	Thermo-Tec Products #ad
Height	0 Inches
Length	0 Inches
Weight	0.2 Pounds
Width	0 Inches
Part Number	14150
Model	14150
Warranty	Contact manufacturer

5. A-Team Performance

#ad

A-Team Performance 010402 Starter Heat Shield Barrier Cover Wrap Insulation High Temperature Fiberglass Versa-Shield Aluminized Protection Silver 7"x 24"

#adA-Team Performance #ad - Withstands 500 degrees fahrenheit of direct heat and 2000 degrees Fahrenheit of radiant heat. Includes 1x a-team performance 7"x 24" Versa-Shield Starter Heat Shield Wrap 010402. Easy to install with hook & loop closure system - no need to remove starter for installation. 7-inch wide by 24-Inch long. An aluminized heat reflective material backed with a hi-temp rated glass fiber insulation barrier.

Brand	A-Team Performance #ad
Manufacturer	A-Team Performance #ad
Part Number	010402
Model	010402

6. Design Engineering

#ad

Design Engineering 010384 Mini Versa-Shield 5.25" x 16.5" Starter Heat Shield Wrap

#adDesign Engineering #ad - For use in most mini high Torque starters. Trim to size for a perfect fit; edges close with hook & loop fasteners so no need to remove starter for installation in most cases. Withstands 500 degrees fahrenheit of direct heat and 2000 degrees Fahrenheit of radiant heat. Fit type: Universal Fit. Multiple uses to protect master cylinders, fuel pumps, distributors, cool cans, and more. Can easily be removed for shows.

Brand	Design Engineering #ad
Manufacturer	Design Engineering, Inc. #ad
Height	10.18 Inches
Length	3.38 Inches
Weight	0.19 Pounds
Width	1.5 Inches
Part Number	10384
Model	10384
Warranty	DEI warrants to the original retail purchaser with proof of purchase for warranty determination that its products are free from defects in material and workmanship while purchaser owns the vehicle upon which such product(s) were originally installed. DEI’s obligation under this warranty shall be limited to the repair or replacement of parts that are determined by DEI to be defective, or refund of the products original purchase price, at DEI’s option, of the alleged defective product. We pledge that if at any time you encounter a problem with our products, we will strive to correct the problem in the most timely and efficient way possible, subject to the terms, conditions, and Limitations contained herein.

7. Design Engineering

#ad

7" x 2', Design Engineering 010235 Ultra 47 Starter Shield for Extreme High Heat

#adDesign Engineering #ad - Measures 24 inches long by 7 inches wide. Easy to install with a hook & loop fastening system. Prolong the life of components by reflecting damaging heat. Able to withstand direct heat of up to 1350°F. Shield length can be trimmed to size.

Brand	Design Engineering #ad
Manufacturer	DEI #ad
Height	0 Inches
Length	0 Inches
Width	0 Inches
Part Number	10235
Model	10235
Warranty	Limited Lifetime Warranty

8. Thermo-Tec

#ad

Thermo-Tec 13575 Adhesive Backed Aluminized Heat Barrier, 12" x 24"

#adThermo-Tec #ad - Made up of woven silica with a flexible aluminized finish. Highly reflective surface of the material is capable of withstanding radiant temperatures up to 2000 degrees Fahrenheit. Protect parts and components, like painted surfaces and plastic parts, from damaging radiant heat. Can easily be applied to any surface or wrapped around a hose or wire to make a clean professional appearance. Adhesive backed side handles direct and continuous temperatures up to 300 degrees Fahrenheit.

Brand	Thermo-Tec #ad
Manufacturer	Thermo-Tec #ad
Height	0 Inches
Length	0 Inches
Weight	0.1 Pounds
Width	0 Inches
Part Number	200-10045
Model	13575

9. Design Engineering

#ad

7" x 2', Design Engineering 010236 ONYX Series Starter Heat Shield

#adDesign Engineering #ad - Fit type: Universal Fit. Dual layered for maximum thermal control. Protect your starter from up to 1350 degrees Fahrenheit of direct heat. Multi-purpose in design and fit, distributors, this shield also can be used to wrap most master cylinders, fuel pumps and many other components. Can be trimmed to size and fastens with a hook and loop system that makes it easy to install without removing the starter. Provides reliable heat protection for starters under severe duty or extreme heat, preventing starter malfunction due to heat soak.

Brand	Design Engineering #ad
Manufacturer	Design Engineering, Inc. #ad
Height	10.94 Inches
Length	8.06 Inches
Weight	0.46 Pounds
Width	0.88 Inches
Part Number	10236
Model	10236
Warranty	DEI warrants to the original retail purchaser with proof of purchase for warranty determination that its products are free from defects in material and workmanship while purchaser owns the vehicle upon which such product(s) were originally installed. DEI’s obligation under this warranty shall be limited to the repair or replacement of parts that are determined by DEI to be defective, or refund of the products original purchase price, at DEI’s option, of the alleged defective product. We pledge that if at any time you encounter a problem with our products, we will strive to correct the problem in the most timely and efficient way possible, subject to the terms, conditions, and Limitations contained herein.

10. AuInLand

#ad

Heat Shield Barrier Cover Wrap, AuInLand Heat Shield Barrier, Heat Shroud Sleeve, 7 in × 23.6 in, Fiberglass Heat Wrap

#adAuInLand #ad - 7-inch wide by 23. 6-inch long. Features: the starter heat shield could withstands 550 degrees centigrade of direct heat and 1093. 33 degrees Centigrade of radiant heat.

Note: please check the size before placing the order. No need to remove starter for installation. You could get the most friendly customer service. Backed with environmental-friendly fiberglass material which has the characteristics of elasticity, heat insulation, wear resistance, flame retardant and radiation protection. Specifications: starter Heat Shield. Installation: easy to install with hook & loop closure system. Please feel free to contact if you meet any problem about the product. Applications: the starter heat Shield is used to protect master cylinders, cool cans, distributors, fuel pumps, and more.

Brand	AuInLand #ad
Manufacturer	Shanghai Shouxu Trading Co Ltd. #ad
Part Number	DO-0111