As an Amazon Associate I earn from qualifying purchases.
HQMaster #ad - Quantity: pack of 10 assorted in a plastic storage case. Degree: 45 degrees. Please check the size before order. Total length: 23. 3mm diameter: 1. 96mm. Apply in reflective film, automotive film, self-adhesive paper or papers on the cutting plotter.
HQMaster #ad - Total length: 20mm; dia. 1. 46mm. Made from tungsten steel, coming with springs. Quantity: pack of 10 assorted in a plastic storage case. 60° blades are recommended for thicker materials such as reflective films, flock and twill materials and also sand-blast resist. Dgree: 60°.
USCutter #ad - Superior ball-bearing dual roller media roller system. Vinyl rolls, magnetic blanks, squeegee, knife, transfer tapes, Lifetime phone support. Roland compatible blade holder gives you access to the most economical blades available.
GrowTech #ad - The hard alloy cutter blades are with fine polishing process, wood, PVC color board, suitable for mahogany, MDF and other precision relief.4. 5. Compatible with cb09 CB09U Graphtec Cutting Blade Holder.
2. They are recommended for all standard cast and calandered vinyls as well as other thin materials such as ThermoFlex Plus. 45°blades are the standard blade that comes with most vinyl cutters. 30°blades are predominantly used for cutting very thin window tint and mylar materials.
GAOHOU #ad - 100% brand new and high quality;material: aluminum alloy surface oxidation, Tungsten steelblade30°, 60°, 45°design fits most of cutting plotter. Note:lighting, display and other factors may cause COLOR SHADING, please comprehensive pictures and text descriptions to deter, Quantity:15PCS Blades+1PC Holder.
Blade size:24mmx2mmlxdia, holder size:45mmx11mmlxDia, greater strength, Carbide tip with higher hardness HRA93, higher hardness, tip more sharper, cutting plotter lettering faster.
MCWlaser #ad - Hole diameter x Width x Outside diameter:4mmx10mmx14mm. Package include:5pcs pinch roller. Brand new, high quality And Extra Long Life.
CJRSLRB #ad - Application: 30 degree blade should be recommended for fabric, thin cardboard and leather, 45 degree blade used for most general purpose cuts, 60 degree blade does the most intricate and delicate cuts.
What you get? 18 x blades for cutting plotter, 1 x blade holder. Blade: 6*30 degree cutter blade yellow cap, 6*45 degree cutter blade Red Cap, 6*60 degree cutter blade Blue Cap.
F.L.S #ad - Standard blade for cutting color adhesive media -standard vinyl. Compatible with Roland, Refine, RabbitHX, . Made in Cemented Carbide. Suitable for cutting media up to 025mm thick.
F.L.S #ad - Compatible with Roland, Refine, RabbitHX. Standard blade for cutting color adhesive media -standard vinyl. Made in Cemented Carbide. Suitable for cutting media up to 025mm thick.
MH Series #ad - 30 inches cut width. Lifetime phone support and web-based resources. Create original artwork or vectorize images with VinylMaster Cut.
Signs, decals, heat transfer for apparel. Make graphics for your community, banners, or bring your signage production needs in-house. Start a home-based business. Superior ball-bearing dual roller system for feeding vinyl.
1. HQMaster
#adHQMaster 45 Degree Tungsten Steel Lettering Blade Vinyl Cutter Blades for Roland Cutting Plotter Red Cap Pack of 10
#adMore information #ad
Fit for most vinyl cutter such as Roland, Cricut. Vinyl cutter plotter cutting blades for mahogany, PVC color board, wood, MDF and other precision relief. Made from tungsten steel.| Brand | HQMaster #ad |
| Manufacturer | HQMaster #ad |
| Height | 0.51 Inches |
| Length | 2.76 Inches |
| Width | 1.97 Inches |
| Part Number | HQ-693 |
More information #ad
2. HQMaster
#adBlue Cap Pack Of 10 with Springs, HQMaster 60 Degree Vinyl Cutter Blades Lettering Blade for Graphtec Cutting Plotter
#adMore information #ad
| Brand | HQMaster #ad |
| Manufacturer | HQMaster #ad |
| Height | 0.51 inches |
| Length | 2.76 inches |
| Width | 1.97 inches |
| Part Number | HQ-891 |
| Model | HQ-891 |
More information #ad
3. USCutter
#adStarter Signmaking Kit, USCutter 34 inch MH 871 Vinyl Cutter Kit with Software, Free Video Training Course
#adMore information #ad
34 inch mh vinyl cutter with stand plus Design and Cut software. Two fully adjustable pinch-rollers allow you to use a flexible range of materials.| Brand | USCutter #ad |
| Manufacturer | USCutter #ad |
| Height | 16 inches |
| Length | 34 inches |
| Weight | 48 pounds |
| Width | 13 inches |
| Part Number | FBA-MHVALUEKIT-VMC |
More information #ad
4. GrowTech
#adCB09 CB09U Graphtec Blade Holder with 15pcs Vinyl Cutter Plotter Cutting Blades 30/45/ 60 Degree
#ad2. They are recommended for all standard cast and calandered vinyls as well as other thin materials such as ThermoFlex Plus. 45°blades are the standard blade that comes with most vinyl cutters. 30°blades are predominantly used for cutting very thin window tint and mylar materials.
More information #ad
1. Including 15pcs cutting blades, 5 pcs 60 degree, 5 pcs 45 degree, 5 pcs 30 degree.3. 60°blades are recommended for thicker materials such as reflective films, flock and twill materials and also sand-blast resist. The blade holder is made of carbide materials, more wear and edge grinding wheel with ultrafine polishing, ultra-hardness, super toughness, edge sharper.| Brand | GrowTech #ad |
| Manufacturer | GROWTECH #ad |
| Part Number | GW17082 |
| Model | GW17082 |
More information #ad
5. GAOHOU
#ad15 x Blades for Cutting Plotter, Tool Accessories Drill Bits, GAOHOU 15pcs 30/45/60 Degree Vinyl Cutter Blade for Roland Cutting Plotter with Blade Holder
#adBlade size:24mmx2mmlxdia, holder size:45mmx11mmlxDia, greater strength, Carbide tip with higher hardness HRA93, higher hardness, tip more sharper, cutting plotter lettering faster.
More information #ad
Blades is imported stainless steel, through the grinding polishing processing, high precision, good lettering quality;Net Weight: 65g/1 SET. Made of aluminum alloy. High quality and extra Long life. Super wear resistance, high hardness, Application:fit for Roland and most domestic and imported plotter.| Brand | GAOHOU #ad |
| Manufacturer | GAOHOU #ad |
| Part Number | YY4206 |
| Model | BU0032 |
More information #ad
6. MCWlaser
#ad5pcs HQ Pinch Roller for Roland GCC LiYu RABIT Pcut Mimaki Graphtec Iolion Cutter Plotter 4x11x16
#adMore information #ad
| Brand | MCWlaser #ad |
| Manufacturer | COLETECH #ad |
| Part Number | CP-PR5-4x11x16 |
| Model | CP-PR5-4x11x16 |
More information #ad
7. CJRSLRB
#adCJRSLRB CB09 Graphtec Blade Holder Base with 18Pcs Cutting Blades 30/45/60 Degree for Silhouette Cameo 1 2 3/Portrait/Curio/Graphtec 6000/CE 5000-60 Plotter
#adWhat you get? 18 x blades for cutting plotter, 1 x blade holder. Blade: 6*30 degree cutter blade yellow cap, 6*45 degree cutter blade Red Cap, 6*60 degree cutter blade Blue Cap.
More information #ad
Compatibility: compatible with graphtec cb09 cb09u, can be ideal replacement for Silhouette cameo 1/2/3/portrait /curio and Graphtec 6000/CE 5000 -60 Plotter. Durable: made of alloy tungsten steel, high quality and extra long life, super wear resistance, high hardness.| Brand | CJRSLRB #ad |
| Manufacturer | CJRSLRB #ad |
| Part Number | GJ292 |
| Model | GJ292 |
More information #ad
8. F.L.S
#ad15pcs 30/45/60 Degree Roland Vinyl Cutter Cutting Plotter Blade Lettering Blades Spare Part
#adMore information #ad
| Brand | F.L.S #ad |
| Manufacturer | F.L.S #ad |
| Weight | 0.22 Pounds |
| Part Number | 55276-US1 |
| Model | 55276-US1 |
More information #ad
9. F.L.S
#ad5pcs 45 Degree Roland GCC Vinyl Cutter Cutting Plotter Blade Spare Part
#adMore information #ad
| Brand | F.L.S #ad |
| Manufacturer | F.L.S #ad |
| Part Number | 55276-US1 |
| Model | 55276-US1 |
More information #ad
10. MH Series
#adFree US-Based Technical & Lifetime Phone Support, USCutter 34-inch Vinyl Cutter Plotter with Stand and VinylMaster Cut Software
#adSigns, decals, heat transfer for apparel. Make graphics for your community, banners, or bring your signage production needs in-house. Start a home-based business. Superior ball-bearing dual roller system for feeding vinyl.
More information #ad
3 fully adjustable pinch-rollers. Trusted performance. Free us-based technical support. 34 inches feed width. Number 1 selling vinyl cutter in the country for 10 years. Free included vectorizing and cut software. Adjustable speed and pressure. Versatile and durable.| Brand | MH Series #ad |
| Manufacturer | USCutter #ad |
| Height | 16 Inches |
| Length | 37 Inches |
| Weight | 47 Pounds |
| Width | 13 Inches |
| Part Number | AMZN-RFCMH871-VMC |
| Warranty | 1 year warranty |
More information #ad
30-90% Disocunts Found!
We found that some of the products on this list are now discounted on Amazon! Do you want to see these products?
Disclaimer: We earn small fee from purchases made on Amazon.
