Top 10 On Board Air Compressor System – Wheel & Tire Air Compressors & Inflators

As an Amazon Associate I earn from qualifying purchases.

1. ARB

#ad

ARB CKMA12 On-Board Air Compressor High Performance 12 Volt for Air Locker Differentials and Tire Inflation

#adARB #ad - Quality components for quiet operation and extra long life. Constructed entirely of lightweight, high strength engineering grade materials. Heavy duty maxi-fuse equipped for professional in-line circuit protection. Sealed for moisture and dust resistance. Hard-anodized cylinder bore for reduced friction.

Brand	ARB #ad
Manufacturer	ARB #ad
Height	5.88 Inches
Length	12.73 Inches
Weight	11 Pounds
Width	9.16 Inches
Part Number	CKMA12
Model	CKMA12

2. VIAIR

#ad

VIAIR 10000 Onboard Air System, Black

#adVIAIR #ad - 40-amp Relay. Viair ultra-light Duty Onboard Air System. Properly sealed, recommended torque for 1/8″ is 10 ~ 11 ft. Lbs. Lbs. Recommended torque for 1/4″ and 3/8″ is 12 ~ 15 ft. T-fitting: 1/4” m x 1/4″ f x 1/8” f. 1/4” drain cock. 1/4” compression fitting. 1/4” plug m. 2 1/4” m npt to 1/8” f bSP.

Brand	VIAIR #ad
Manufacturer	Viair Corporation #ad
Height	6 Inches
Length	10.25 Inches
Weight	8.12 Pounds
Width	7.5 Inches
Part Number	10000
Model	10000

3. Vixen Horns

#ad

Vixen Horns 1.5 Gallon 5.6 Liter Train/Air Horn Tank with 200 PSI Compressor Onboard System/Kit 12V VXO8315

#adVixen Horns #ad - Precision Welded. Tank capacity: 1. 5 gallon 6 liter. 12 volt 200 psI Compressor. Anti-corrosion Coating. Pressure gauge, pressure Switch, Air Hose and Mounting Hardware Included.

Brand	Vixen Horns #ad
Manufacturer	Vixen Horns #ad
Part Number	VXO8315

4. Air Lift

#ad

AIR LIFT 25592 Load Controller II On Board Air Compressor System

#adAir Lift #ad - The easy-to-read pressure gauge allows for on-the-go adjustments, with one gauge, dual needles, and a simple inflate and deflate button. Perfect for light or medium duty applications for air springs. Economically priced on board air compressor system. Single path system inflates two air springs at the same rate at the same time. Low pressure sensor automatically activates compressor if pressure drops. Includes compressor and gauge and wiring harness.

Brand	Air Lift #ad
Manufacturer	Air Lift Company #ad
Height	8 Inches
Length	12.5 Inches
Weight	4.5 Pounds
Width	6.4 Inches
Part Number	25592
Model	25592
Warranty	One Year Limited Warranty

5. VIAIR

#ad

VIAIR 150 PSI High-Flow Air Source Kit

#adVIAIR #ad - Includes pre-installed parts which is as follows, 110/145 PSI automatic pressure switch, drain cock, pressure safety release valve and 1/2 inch air-out compression fitting. Product must be mounted rightside up and drained from moisture after use. 150 psi maximum working pressure. Sealed compressor, relocate air filter if operating in outside environment. Replaceable/relocatable air filter element for harsh environments. Designed as an onboard air solution for actuate air horns.

Brand	VIAIR #ad
Manufacturer	Viair Corporation #ad
Height	13.7 Inches
Length	18.9 Inches
Weight	19.75 Pounds
Width	5.9 Inches
Part Number	20005
Model	20005
Warranty	One year, manufacture's defect warranty covers defects in workmanship and materials only. For more information, please visit: http://www.viaircorp.com/warranty

6. VIAIR

#ad

VIAIR Constant Duty Onboard Air System, 10007

#adVIAIR #ad - Can inflate four tires up to 37 inches in diameter. Ingress protection Rating: IP67. Designed to be installed and mounted onto the vehicle. Intended for inflation of tires up to 37 inches.

150 psi maximum working pressure and 100% duty cycle at 100 PSI; 20feet 12-Gauge Wire with Inline Fuse Holder. Please check the manufacturer's website for a wiring diagram. Includes all parts needed for installation of you very own onboard air solution for tire maintenance and small pneumatic tools. Comes with a viair 450c air compressor and a 110 to 145 PSI Pressure switch. Designed for uninterrupted use for up to an hour! at 72 degrees ambient temperature One year manufacturer's defect warranty included with copy of the receipt.

Brand	VIAIR #ad
Manufacturer	Viair Corporation #ad
Height	10 Inches
Length	26.5 Inches
Weight	9.5 Pounds
Width	14.5 Inches
Part Number	10007
Model	10007
Warranty	All VIAIR products come with a One Year Manufacturer Defect Warranty

7. VIAIR

#ad

VIAIR 200 PSI Ultra Duty Onboard Air System

#adVIAIR #ad - Intended for inflation of tires up to 37 inches or to actuate air horns that require 200PSI. Air tank should be used with a drain cock and pressure release valve. Includes the essential components to install an onboard air system: 480C Air compressor, pressure switch, 2. 5 gallon air tank, relay, air tank fittings, air line and wiring.200 psi maximum working pressure, 1. 76 cfm @ 0 psi. One year manufacturer's defect warranty through manufacturer with receipt. Can inflate a 37 inch tire from 0-30PSI in 7 minutes and 10 seconds.

Brand	VIAIR #ad
Manufacturer	Viair Corporation #ad
Height	9.9 Inches
Length	26 Inches
Weight	31.5 Pounds
Width	13 Inches
Part Number	20001
Model	20001
Warranty	One year, manufacture's defect warranty covers defects in workmanship and materials only. For more information, please visit: http://www.viaircorp.com/warranty

8. Vixen Air

#ad

Vixen Air Suspension Kit for Truck/Car Bag/Air Ride/Spring. On Board System- 200psi Compressor, 3 Gallon Tank. for Boat Lift,Towing,Lowering,Leveling Bags,Onboard Train Horn,Semi/SUV VXO4831B

#adVixen Air #ad - Anti-corrosion Coating. 12 volt 200 psi compressor Black with Remote Filter. Precision Welded. Remote filter, pressure switch, Drain Valve, Relay with Pre-wired Plug and Mounting Hardware Included. Tank capacity: 3 gallon 12 liter.

Brand	Vixen Air #ad
Manufacturer	Vixen Air #ad
Weight	23 Pounds
Part Number	VXO4831B

9. Vixen Air

#ad

2 Gallon Tank. for Boat Lift,Towing,Lowering,Leveling Bags,Onboard Train Horn,Semi/SUV VXO8560, Vixen Air Suspension Kit for Truck/Car Bag/Air Ride/Spring. On Board System- 150psi Compressor

#adVixen Air #ad - Duty cycle: 33% @ 100 psi, flow rate: 2. 18cfm @ 0 psi. Tank capacity: 2 gallon 8 liter. Anti-corrosion Coating, Precision Welded. Pressure gauge, fuse, pressure switch, Safety Valve, Air Hose and Mounting Hardware Included.12 volt 150 psI Compressor.

Brand	Vixen Air #ad
Manufacturer	Vixen Air #ad
Part Number	VXO8560

10. VIAIR

#ad

VIAIR 10002 Quarter Duty Onboard Air System

#adVIAIR #ad - Includes all parts needed for installation of you very own onboard air solution for air lockers and small air horns. Properly sealed, recommended torque for 1/8 inches is 10 to 11 feet pounds.

Remote mount air filter assembly, sealed compressor, 2. 0 gallon air tank, 90 to 120PSI pressure switch and more! Thread tape is not recommended. Please note- use thread sealant for proper installation. Recommended torque for 1/4 inches and 3/8 inches is 12 to 15 feet pounds. Can be used to inflate helper bags for load leveling, inflate four tires up to 31 inches in diameter or use with heavy duty air horns. Not intended for tire inflation. 120 psi maximum working pressure and 25% duty cycle. Just connect your air line into our onboard air system. Designed to actuacte smaller air horns, air lockers and for minor load levelling adjustments.

Brand	VIAIR #ad
Manufacturer	Viair Corporation #ad
Height	10 Inches
Length	23 Inches
Weight	0.01 Pounds
Width	14 Inches
Part Number	10002
Model	10002
Warranty	One year, manufacture's defect warranty covers defects in workmanship and materials only. For more information, please visit: http://www.viaircorp.com/warranty