Top 10 Harmonic Balancer Pulley Kit – Automotive Tools & Equipment

As an Amazon Associate I earn from qualifying purchases.



Harmonic Balancer Puller Removal & Install Tool Kit Flywheel Remover Crankshaft Pulley Removal Steering Wheel Pulling Set

DPTOOL #ad - Tips: this kit not fit all the vehicle, not have m12 x 1. 75 bolt, not fit 4. 0l chrysler engine early 2000's pacifica, not for lT1 Gen 2 engines, 2008-2010 Chrysler T&C Limited or Dodge Grand Caravan. Profesional replace balancer kit: this kit made you to removal and install balancer a breeze, the thrust bearing design on this model is nice, removal and installation of the balancer required minimal effort, very easy to use and a must-have tool if you're changing out a harmonic balancer.

Specifications: m16 x 2. 0, m8 x 1. 25 x 90mm; silver screws unc 3/8” x 2”, unc 3/8” x 3”, unc 3/8” x 4-1/2”, 3/4-16, unc 5/16” x 3-1/2”, 9/16-18, 7/16-20; black screws m10 x 1.5 x 35mm, 1/2-20, unf 3/8” x 1-1/2”, m14 x 1.5, m12 x 1. 5, unf 1/4" x 2-1/2”, 5/8-18, unf 5/16” x 3”, unc 5/16” x 6”, M8 x 1.2

25 x 45mm, unc 3/8” x 2”, m8 x 1. 25 x 65mm, please carefully check your car's specifications. Wide application: comes with a number of metric and standard bolts so it should work for most applications. Flywheel remover, crankshaft Pulley Removal, Steering Wheel Pulling Set to remove worn or damaged harmonic balancers on any vehicle. Made the job very quick and easy with no damage to any engine parts, went on/off evenly and smoothly.
BrandDPTOOL #ad
ManufacturerDPTOOL #ad
Part NumberHL49



Adjustable 3-Jaw Puller Fits Most Late Model Vehicles, Forcing Screw Fits a 3/8” Square Drive, Includes 4 Forcing Rods, OEMTOOLS 25090 Harmonic Balancer Puller Kit

OEMTOOLS #ad - Instructions and storage case included: Our harmonic balancer pulley removal tool comes with easy-to-follow instructions and a durable blow-molded carrying case; Easily take this harmonic balancer puller set from job to job.

For pressed-on harmonic balancers: harmonic balancer tool is designed for pressed-on harmonic balancers with a single center retainer bolt; Uses 3 jaw puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers. Wide application: crankshaft harmonic balancer puller designed for use with model gm 2000 Generation II Cadillac 1988 - Newer, Chevrolet Trucks 2003 - Newer, Chrysler 1990, Ford 1995 - Newer, and Mitsubishi Eclipse 1995.

Easy to use: unique spring-loaded jaws hold the legs in place when positioning the harmonic balancer removal tool, making removing and reinstalling the harmonic balancer a relatively simple and inexpensive process. Product specifications: includes puller body, 5-13/32", 6-1/2", 3-jaw puller, 3 Jaw Retaining Pins, 3 wave washers, 4 pressure Screw Adapter Rods 4", and 7-13/32"; Blow-Molded Carrying Case.
ManufacturerOEMTOOLS #ad
Height2 Inches
Length9.3 Inches
Width7.2 Inches
Part Number25090
WarrantyOEMTOOLS Limited Lifetime



And Crankshaft Pulley Puller, Steering Wheel Puller, OEMTOOLS 27187 Harmonic Balancer Puller Kit, Works as Gear Puller, Heat-Treated Steel Harmonic Balance Puller Yoke

OEMTOOLS #ad - Easy-to-use pulley puller: features a yoke with 4 slots, which allows for 2 or 3 hole applications; The floating swivel prevents damage to shaft ends; Our harmonic balancer kit's washers won't pull through the yoke while torquing the pressure screw. Comes in a sturdy blow-mold storage case.

Used to remove many harmonic balancers, vibration dampers, pulleys, or gears. Diy or pro harmonic balancer remover: removing harmonic balancers with a prybar damages components; Our pully puller tool easily and safely removes harmonic balancers, pulleys, vibration dampers, and more; Includes bolts for GM 3300 and 3800 V6 engines. Durable puller tool: the steering wheel remover's yoke is heat-treated for strength and durability; Lubricate the pressure screw before using the steering wheel pullers to make the operation easier; Not meant to be used with impact drills.

Reliable harmonic puller: the screw tip keeps the harmonic pulley puller in place while you apply torque; The pressure screw will apply even pressure with the screw tip lifting the harmonic balancer or crank shaft pulley away from the vehicle. Includes bolts for gm 3300 & 3800 V6 Engines. Versatile harmonic balance tool: not just a harmonic balancer pulley puller; This gear and pulley puller kit's equipped with a pressure screw and bolts that can be used as a steering wheel puller kit and crank pulley puller kit; Invest in versatility.
ManufacturerGreat Neck Saw #ad
Height2.1 Inches
Length9.2 Inches
Weight3.35 Pounds
Width8.1 Inches
Part Number27187
WarrantyOEMTOOLS Limited Lifetime

4. ABN


ABN Universal Harmonic Balancer Puller & Installer 52-Piece Tool Kit – Master Balancer & Pulley Removal/Installation Set

ABN #ad - Specifications: heavy duty 3/4" diameter forcing screw internally threaded to fit the eight adapters to install harmonic balancers; adapters m16 x 2. 0, unc 3/8” x 3”, unf 5/16” x 3”, unc 3/8” x 4-1/2”, unc 5/16” x 3-1/2”, 1/2-20, 5/8-18, m12 x 1.5, m14 x 1. 5, unc 5/16” x 6”, 3/4-16, m8 x 1.

25 x 90mm; silver screws unc 3/8” x 2”, M8 x 1. 25 x 45mm, unf 3/8” x 1-1/2”, 9/16-18, unf 1/4" x 2-1/2”, m8 x 1.25 x 65mm, 7/16-20; black screws M10 x 1. 5 x 35mm, unc 3/8” x 2”. Contents: package includes 1 puller shaft + 1 flanged nut + 1 puller plate bearing + 8 adapters + 11 washers + 10 black screw bolts + 20 silver screw bolts + 1 carrying case. Practical: use the abn universal harmonic balancer puller & installer 52-Piece Tool Kit – Master Balancer & Pulley Removal/Installation Set to safely remove harmonic balancers and drive pulleys which are pressed fitted onto the crank shaft without damaging your vehicle.

Versatile: also works on gear pulleys and steering wheels; bearing-centered circular 2/3-way and an assortment of metric and fractional bolts and adapters provide wide coverage; Fits L98 & LT series engines, GM LS1 with aftermarket 3-bolt style balancer; If your balancer has threaded drilled and tapped holes in the front to attach supplied pulling bolts to, it is compatible. Easy storage: heavy-duty 13” x 9. 5” x 2. 5” 33cm x 24.
BrandABN #ad
ManufacturerABN #ad
Height2.25 Inches
Length13 Inches
Weight8.51 Pounds
Width10 Inches
Part Number6595



OEMTOOLS 27019 Harmonic Balancer

OEMTOOLS #ad - Set includes: yoke, Pressure Screw, and Pulling Screws. Great for Pulling Balancers and More. Floating swivel Prevents Damage to Shaft Ends. Ideal for Any Shop or Garage. Comes in a sturdy Blow-Mold Storage Case.
ManufacturerOEM #ad
Height1 Inches
Length1 Inches
Weight2.7 Pounds
Width1 Inches
Part Number27019

6. ABN


ABN Long Reach Harmonic Balancer Installer Kit – 5 Piece Harmonic Balancer Pulley Puller Set Damper Puller Kit

ABN #ad - Protect your crankshaft from failure: the abn long reach harmonic balancer installation Tool Pulley Set allows you to quickly and easily install replacement harmonic dampers into your vehicle; A harmonic balancer protects your vehicle from damaging vibrations that can wear down the life of your crankshaft and protects your crankshaft threads from stripping, making it important to install the harmonic balancer with precision and accuracy.

Easy to use: attach the pressure bearing screw nut onto the chosen jack screw; After guiding the replacement harmonic balancer onto crankshaft pin, thread the jack screw into the crankshaft and hand tighten the pressure bearing to the harmonic balancer; Continue tightening system into place with hand wrench not included and remove installer assembly; Always wear safety gear. Convenient storage: heavy-duty plastic blow-molded case provides convenient organization and easy transportation; The 10 x 5.

2 x 2. 8 inch 25. 4 x 13. 2 x 7. 1 cm carrying case features lock latches for safe storage. Contents: long reach harmonic puller tool includes a pressure bearing and screw nut assembly tool and 4 jack screws to fit a variety of vehicle sizes; Constructed of heavy-duty metal materials for durability and longevity with a black oxide finish for resistance to corrosion. Fits your vehicle: designed for use on many late ford, dodge, and chrysler vehicles with V8 and V6 engines; Long reach thread sizes include M14x1.
BrandABN #ad
ManufacturerABN #ad
Height2.8 Inches
Length10 Inches
Weight1.5 Pounds
Width5.2 Inches
Part Number7429

7. Powerbuilt


Powerbuilt 33 Piece Harmonic Balance Puller and Pulley Installer Kit, 648616 , Black

Powerbuilt #ad - Includes special puller for removal of the crankshaft pulley on many 1990 and newer Chryslers engines. Tool solutions for most all situations.

Kit services: many domestic V8 and V6 engines with harmonic balancers with threaded holes. Built to exceed tool standards. Storage case includes usage photos. Kit 45 includes 33-piece for removal and installation of harmonic balancers with threaded holes. Strong and dependable enough to last a lifetime. Tool set for removal and installation of harmonic balancers that have threaded holes. Combo 2/3 jaw gear pull 4. For use on many uS made V6 and V8 engines.
BrandPowerbuilt #ad
ManufacturerAlltrade Tools #ad
Height13.63 Inches
Length3.25 Inches
Weight10.3 Pounds
Width15.88 Inches
Part Number648616
WarrantyLimited Factory Warranty



NAKAO Harmonic Balancer Puller Tool Kit, Flywheel Puller, Crankshaft Pulley Removal, Steering Wheel Pulling Set46 Piece

NAKAO #ad - Providing high quality and professional parts with great service. If you have any questions, please feel free to contact us by email for more information!We will solve it for you in the first time! Bolt sizes:3/8-inch bolt in 1-1/2, and 6-inch lengths, 18, 4.5, 24, 3. 5, 2, 1/4-inch bolt in 2.

5-inch length, and m10 x 1. 5mm bolt in 35mm length; bolts come in a mixture of 16, 5/16-inch bolt in 3, and 90mm lengths, M8 x 1.25mm bolt in 45, 65, and 6 inch lengths, and 28 thread pitch. Muti-function: 46 piece harmonic balancer puller kit designed to handle a range of jobs, Steering Wheel Pulling Set to remove worn or damaged harmonic balancers on any vehicle, Crankshaft Pulley Removal, Flywheel Remover, features a steel yoke with 4 slots and 30 harmonic balance puller bolts enabling use on nearly any vehicle configuration.

Package include:1 x 5 inch long 3/4-inch pressure screw, 30 x bolts, 1 x flat shaft adapter, 2 x centering adapters, 1 x steel yoke, 11 x different sized washers, 1 x carrying case. High quality:heat-treated carbon steel for ultimate strength and longevity, perfect for professional machinists. Chrome and black oxide finishes resist rust and corrosion; Heavy-duty blow-molded carrying case provides easy transportation, includes a variety of screws and bolts, safe storage, helps the tool withstand tough pulling jobs, and quick organization.
BrandNAKAO #ad
ManufacturerNAKAO #ad
Height0.1 Inches
Length2 Inches
Width2 Inches
Part Number7061

9. ABN


ABN 13 Piece Harmonic Balancer Steering Wheel Puller Kit

ABN #ad - Blow-molded case: steering wheel puller tool harmonic balancer steering wheel puller kit comes in durable blow-molded plastic case to ensure efficient identification and organization of harmonic balancer puller parts.

Fit for your tool kit: wheel puller set includes 1 floating swivel, 3 1/4 by 2 inch 6. 3mm x 50mm bolts, 2 1/4 by 3 inch 6. 3mm x 76mm bolts, 2 5/16 by 4 inch 7. 9mm x 101mm bolts, 3 5/16 by 2 inch 7. 9mm x 50mm bolts. Car maintenance made easy: when removing harmonic balancers, and crank shaft pulleys, gear pulleys, steering wheels, depend on the ABN 13 Piece Harmonic Balancer Steering Wheel Puller Kit.

Built to last: steering wheel puller kit bits are hardened and tempered to ensure longevity and strength; Machine precision flywheel puller tool designed to withstand extended, repeated use. Even application: no need to worry about steering wheel puller harmonic balancer puller kit causing damage to car parts; Yoke allows for 2 and 3-hole application; Harmonic balancer puller allows even pressure to parts.
BrandABN #ad
ManufacturerABN #ad
Height7 Inches
Length9 Inches
Weight2.49 Pounds
Width1.8 Inches
Part Number3224

10. Aain


Aain Harmonic Balancer Puller Kit, Professional Automotive Mechanic Tool Set Harmonic Balancer Puller Installer Kit for Removing Harmonic Balancers and Dampers, 5 Piece Removal Tool Set

Aain #ad - When positioning the harmonic balancer disassembly tool, the spring gripper holds the bracket in place, making disassembly and reinstallation simple and inexpensive. Shock absorber pulley in the sealed engine compartment is designed to be removed without removing the radiator. 3-jaw puller with four lengths of forcing rods, one forcing screw with a 3/8-inch square drive for use with a ratchet, one 3/4-inch hex for wrench or socket use. Fits a variety of chrysler, vans, pickups, GM, Cadillac, SUVs, Mitsubishi, etc. High quality plastic storage box. Portable and easy to store.
BrandAain #ad
ManufacturerAain #ad
Part NumberMK29