As an Amazon Associate I earn from qualifying purchases.









1. A-KARCK
#ad
Exhaust Tip 3" Inlet Dual Wall, A-KARCK Double Wall Tailpipe Tip 3" Inlet 4" Outlet 5" Overall Length Weld On Decorate Car Tailpipe
#adA-KARCK #ad - Installation: the method of welding the exhaust tip can ensure long-term use and safety. 3" id exhaust tip: 3" inlet diameter 4" outlet diameter 5" overall length, universal fits for 3" outer diameter tailpipe.More information #ad
Material: made of 304 stainless steel to avoid corrosion and deformation of the existing tailpipe. Unique design: exquisite workmanship, bright as a mirror after repeated polish processing. Appearance: the exquisite appearance makes it the nice choice for decorative vehicles.Brand | A-KARCK #ad |
Manufacturer | A-KARCK #ad |
Height | 5 Inches |
Length | 4 Inches |
Width | 4 Inches |
Part Number | New304005DAC |
More information #ad
2. Upower
#ad
Upower Square Exhaust Tip 2.5" Inlet 3" x 5.5" Outlet 9" Long Chrome Stainless Steel Polished Diesel Pipe Weld-On
#adUpower #ad - Please do measure your tailpipe. Pack of 1; professional installation is highly recommended; No instruction included. Materials: made of high quality Stainless steel has very strong anti-corrosive, Never Rusty.More information #ad
Fits: to ensure proper fit make sure your exhaust inlet diameter is 2. 5 2 1/2 inch. Weld on installation and Square Single Angled Cut - Rolled Edge Design. Id: 2. 5" od: 5. 5"x3" length: 9" Angled Roll Oval. For tailpipes of 2. 5 inch outER diameter only.Brand | Upower #ad |
Manufacturer | Partssquare #ad |
Part Number | 186480 |
Warranty | 1 year. |
More information #ad
3. Upower
#ad
Upower 2.25" to 3" Exhaust Tips 2 1/4 inch Inlet 3 inch Outlet 8" Long Stainless Steel Exhaust Tailpipe Tips Universal for Cars Sedans and Trucks Weld-On Double Wall Thick
#adUpower #ad - Fits: to ensure proper fit make sure your exhaust INLET diameter is 2. 25 2 1/4 inch. Weld on installation and Double Wall Slant design. Id: 2. 25" od: 3" length: 8" Double Wall Slant.More information #ad
Materials: made of high quality Stainless steel has very strong anti-corrosive, Never Rusty. Pack of 1; professional installation is highly recommended; No instruction included.Brand | Upower #ad |
Manufacturer | PartsSquare #ad |
Part Number | 165733 |
More information #ad
4. Tritrust
#ad
Black Exhaust tip, 3" ID x 4"OD x 7.5"L -Double Wall Weld On Muffler Tail Pipe Stainless Steel Black Coated
#adTritrust #ad - This muffler tips won’t change the function of your car. Made by high quality stainless steel with black coating to enhance the appearance of your car. Weld-on installation: They are attached to the tailpipe by welded joints between the edges.More information #ad
Size : inlet diameter 3 '' / outlet diameter 4''/ Length 7. 5 '' / width 4''. Please measure your own pipe and bumper cutout, and compare to this product fitment size.Brand | Tritrust #ad |
Manufacturer | Tritrust #ad |
Part Number | T00046BK |
More information #ad
5. Vibrant Performance
#ad
Weld-On, Single Wall, Mirror Polished, 3.00 in. Inlet I.D, 11.00 in. long, 304 Stainless Steel, Angle Cut, each, Vibrant Power 1561 Exhaust Tip, 3.50 in. Outlet O.D
#adVibrant Performance #ad - Exhaust tip, weld-on, 11. 00 in. Inlet I. D. Mirror Polished, 3. 50 in. Long, 304 stainless steel, single wall, 3.00 in. Outlet O. D. Angle Cut, each.More information #ad
Brand | Vibrant Performance #ad |
Manufacturer | Vibrant #ad |
Height | 4 Inches |
Length | 12.75 Inches |
Weight | 2.4 Pounds |
Width | 4 Inches |
Part Number | VIB1561 |
Model | 1562 |
Warranty | Contact manufacturer |
More information #ad
6. Upower
#ad
Upower Exhaust Tip 2.25" Inlet 3" Outlet 16" Long Weld On Tailpipe 2 1/4" to 3" for Car Trucks Universal Polished Stainless Steel Angle Cut
#adUpower #ad - 1 year warrantyno instruction is included. Designweld on - single Wall - Slant Angle Cut. Wide applicationuniversal fits 2. 25"2 1/4"inlet diameter car trucks pickup exhaust tail pipe tip. Professional installation is highly recommended.More information #ad
Dimension2. 25 inch inlet diameter; 3 inch outlet diameter; 16 inch overall length. Materialhigh quality mirror polished 304 Stainless steel. Durable and anti-corrosive, protect the original tips from Sun and Rain, avoid rusting and deformation.Brand | Upower #ad |
Manufacturer | Partssquare #ad |
Part Number | 186065 |
Warranty | 1 Year |
More information #ad
7. LCGP
#ad
LCGP 3“ Inlet Exhaust Black Tip, 3" x 4" x 12" Long Clamp Bolt On Exhaust Tailpipe Tip for Truck
#adLCGP #ad - There are a small hole on bottom of tip to drain water, not easy to accumulate water and prevent rust. Black powder coated surface treatment, high temperature resistance, not easy to scratch & fall off.More information #ad
However, welding is recommended. Easy slip on 3 in outside diameter tailpipe. 3 inch inside diameter inlet, 4 inch outside diameter outlet, 12 inch overall length. High quality stainless steel infused with anti-corrosive agents that prevent your exhaust tip from rusting.Brand | LCGP #ad |
Manufacturer | LCGP #ad |
Height | 4.5 Inches |
Length | 13.7 Inches |
Width | 4.5 Inches |
Part Number | 304012RACK4 |
More information #ad
8. NETAMI
#ad
3" Inlet to 4" Outlet NETAMI NT-3015 Exhaust Tip Stainless Steel Double Wall Black Chrome Weld-on
#adNETAMI #ad - Please measure size of your stock pipe before place a order. High temperature glossy Black Chrome coated provides extra protection and high end look. Two year limited warranty.More information #ad
Installation: easy to weld over any vehicle with 3" stock tailpipe. Premium quality stainless steel with Double Wall Construction for durability and long lasting. This product won't fit any pipe size over 3" diameter.Brand | NETAMI #ad |
Manufacturer | NETAMI USA INC #ad |
Height | 4 Inches |
Length | 5.5 Inches |
Width | 4 Inches |
Part Number | NT-3015 |
Model | NT-3015 |
Warranty | 2years manufacturer Parts Warranty |
More information #ad
9. Vibrant Performance
#ad
Angled Cut, Single Wall, 4 in Round Outlet, Each, Cut Edge, Stainless, Weld-On, 20 in Long, 3 in Inlet, Polished, Vibrant Performance Exhaust Tip
#adVibrant Performance #ad - Five year limited warranty. Designed for efficient channeling of the exhaust gases. Features a single wall angle-cut. Highly heat and corrosion resistant. Molded from t304 stainless steel.More information #ad
Brand | Vibrant Performance #ad |
Manufacturer | Vibrant #ad |
Height | 4.75 Inches |
Length | 26 Inches |
Weight | 3 Pounds |
Width | 4.75 Inches |
Part Number | VIB1557 |
Model | 1558 |
Warranty | 1 Year |
More information #ad
10. Artist Unknown
#ad
4" Outlet, 12" Long Stainless Steel Exhaust Tip Black Weld-on, 3" Inlet
#adArtist Unknown #ad - Tip inlet Diameter:3in. Manufacturer part Number: 105-ET22. Interchange part Number:105-ET22. Pipe inlet Diameter:3in. Pipe outlet diameter:4in. Design:roundlength:12in. Other part number:105-et22. Tip outlet Diameter:4in. Superseded part number:105-et22.More information #ad
Brand | Artist Unknown #ad |
Manufacturer | not known #ad |
Part Number | not known |
More information #ad