As an Amazon Associate I earn from qualifying purchases.
1. Forfuture-go #ad
10FT 4AN Braided Fuel Line Hose Nylon Braided for 1/4" Tube Size #adForfuture-go #ad
- The fitting adapter for PTFE hose is NOT FIT. Working pressure: 500 psi. Our rubber hose should compatible with rubber fitting adapter. Note: double check the hose size before bidding.
Working temperature: -40°F to +300°F. Burst pressure: 2000 PSI. Application for: racing fuel, diesel, pump gas, alcohol based fuels, fuels with ethanol, motor oil & coolant etc. Inner diameter: 5. 56 mm 022 inch, outer Diameter: 11. 17 mm 044 inch.
2. SUNROAD #ad
20 Feet 4AN AN4 1/4" Fuel Line Hose Braided Stainless Steel Oil Gas Fuel Hose CPE Synthetic Rubber Line Silver #adSUNROAD #ad
- Premium nylon and stainless steel wires material, sturdy durable, abrasion and high temperature resistant, Perfect racing Replacement fortings Replacement for fuel injection use.
Material: innter hose: cpe synthetic rubber;The middle layer: 304 stainless steel wire mesh sleeve;The outer layer: High quality braided nylon & stainless steel.
Working temperature: -40 ℉ to +248 ℉; working pressure: 1000PSI; Burst Pressure: 6000 PSI. Application replacement for: racing fuel, pump gas, diesel, alcohol based fuels, fuels with ethanol, motor oil & coolant etc. Sizeid: an 4, length: 6. 09m/20ft, color: Silver.
3. theBlueStone #ad
TheBlueStone 10FT -4AN Nylon Braided Fuel Line Hose for 1/4" Tube Size #adtheBlueStone #ad
- Application for: racing fuel, diesel, alcohol based fuels, pump gas, fuels with ethanol, motor oil & coolant etc. Note: double check the hose size before bidding. The fitting adapter for PTFE hose is NOT FIT.
Working temperature: -40°F to +300°F. Our rubber hose should compatible with rubber fitting adapter. Inner diameter: 5. 56 mm 022 inch, outer Diameter: 11. 17 mm 044 inch. Working pressure: 500 psi. Burst pressure: 2000 PSI.
4. NEW DAFU #ad
NEW DAFU 1/4 Inch 6mm ID NBR Nylon Braided Fuel Line Set,5 Ft＋6 Pcs 2/5 Inch ID Hose Clamps,For Motorcycle Kawasaki Kohler Briggs Stratton Small Engines,Boat Marine Outboard Gas Diesel Petrol #adNEW DAFU #ad
- Our fuel line's main material is: nbr copolymer of butadiene and acrylonitrile, which makes our fuel line more resistant to high/low temperature - 30 °C~120 °C and aging compared with other common fuel lines, It will not crack and its performance ↑ 50%. No matter in extremely cold areas or high temperature desert, It will always accompany your vehicle to arrive the destination safely.
For use in motorcycle mowers tractors snow blowers dirt bikes and all small engines, Use hose and clamps, transfer of petroleum products fuel lines for small engines. The package includes:1×5 feet1. 5m 1/4" 6mm id fuel line, 6 × 2/5" id 65 manganese steel spring hose clamps, The dimensions of the two parts are compatible with each other, You can use them directly without additional purchases.
Wall thickness is 3mm:contains 3 layers of material:1. The outer layer is chloroprene rubber with good elasticity;2. The middle layer is nylon Braided, which can increase oil resistance, acid and alkali resistance, and resist various corrosive liquids.
The thickened tube makes you feel at ease, which increases the working pressure 300PSI / 2MPa and the maximum burst pressure 1200psi / 8MPa;3. The inner layer is NBR, No worries about leakage. The service life can be up to 9 years, so the fuel line will not leak under any circumstances, No matter what questions you have, 3 times more than the other ordinary fuel lines, And keep good working condition, Don't worry about your vehicle, We will always support you.
|Brand||NEW DAFU #ad|
|Manufacturer||NEW DAFU #ad|
|Model||NEW DAFU Fuel/Gas Line 01|
5. LTI #ad
4AN, LTI Universal 10ft Nylon Stainless Steel Braided 1/4" AN4 PTFE E85 Fuel Line Hose Injection SILVER #adLTI #ad
- We provided 12 months warranty from the date of purchased. Please measure before purchase! Fit for AN PTFE hose end fitting ONLY. Pressure rating: maximum Working Pressure psi: 2000 psi. Outside diameter: 031"8mm. Ptfe nylon braided fuel line can be used as fuel injection hose, vacuum line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, ls engine swap fuel line, EFI fuel line, vapor return line, fuel return line, fuel supply line and other high temperature high pressure applications.
This ptfe nylon braided fuel hose are specially designed to work in any automotive project. 4an ptfe e85 fuel hose length: 10ft. This hose is made of high-quality ptfe on the inside that gives them high chemical and heat resistance, extreme pressure resistance, along with a braided Black Nylon outside which gives them high durability, and Professional installation is highly recommended.
Inner diameter: 019" 4. 83mm. Bursting pressure psi: 6000psi. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility. Working temperature range: -76℉ to 446℉ -60℃ to 230℃.
6. WATERWICH #ad
WATERWICH Fuel Line Hose 4AN 1/4" PTFE E85 10FT Fitting Kit Stainless Steel Braided Silver #adWATERWICH #ad
- 5. Professional installation recommended: PTFE hose relatively hard, it can't be bend and folding in half. 4. Package included: 3/16" an4 ptfe fuel line length: 10feet/3m，6pcs 4AN PTFE hose end fittings 2pcs straight, 2pcs 45 degree, 2pcs 90 degree.
2. Wide application: it used for turbo oil feed and boost line, carb fuel line, transmission oil cooler line, EFI fuel line, vacuum line, fuel return line, vapor return line, ls engine swap fuel line, fuel supply line and other high temperature high pressure applications.
Bursting pressurepsi : 12000psi.
Please make sure the dimension, pressure and temperature range before purchase. 3. Operating temperature can even use it at -76℉min or 446℉max -60℃ to 230℃. Ptfe tube fuel hose length: 10Ft, inner diameter: 3/16" 4. 83mm, outside diameter: 031in 8mm. Maximum working pressurepsi : 4000psi. Stainless steel for excellent flexibility and resistance to abrasion. 1.
7. X AUTOHAUX #ad
X AUTOHAUX 20 Ft 4AN Fuel Hose AN4 1/4" Universal Braided Stainless Steel CPE Oil Fuel Gas Line Hose #adX AUTOHAUX #ad
- Made of cpe synthetic Material and Stainless Steel Wires, which is durable. Operating temperature: -40 Degree F to +350 Degree F. Braided fuel hose with special hand feel, maximized resistance to heat, corrosion and abrasion.
Application: universal, such as fuel, lube, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes etc. Working pressure: 1000 psi / 69 bar; burst pressure: 5000 psi / 345 Bar. Length:20 ft, inner diameter: 022" / 6mm, outside Diameter: 044" / 11mm.
8. Byredio #ad
1/4" Fuel Line, 4AN Fuel Hose 10Ft Stainless Steel Nylon Braided Transmission Lines For Oil, Fluids, Transmission, Cooler, Clutch, Gas, Brake #adByredio #ad
- Cut the size as you want - the 4an fuel line is 10 feet / 3 m, can be cut to size for all your applications. High-quality material - the high-pressure 1/4 fuel line covered with high quality is woven Nylon and 304 stainless steel braided + CPE synthetic rubber to enhance flexibility and give a cool racing appearance.
Nylon braided - the 4an transmission line can stand -104ºf to +302 ºf/-40ºc to +150ºc, oil cooler kit, fuel filter, turbo cooler system, fuel return system, the maximum working pressure up to 500 PSI. Steel, aluminum, or plastic lines will not bend as easily as this tube.
Oil resistant, and ethanol tolerance. Our braided fuel line is also an excellent alternative to conventional fuel lines, cold-resistant, the 4an braided line can be applied to higher-intensity temperature and pressure environments.
But not fit e85. The 4an fuel line has good retardancy and excellent corrosion resistance. Flexibility - the highlight of this fuel line is its sublime pliability. Best for the brake system, oil return, and transmission system, fuel pump, ect. It also results in more fluidity in transmission. Wide application - the 4an fuel line specially designed to compatible with any fuel including methanol and nitromethane, brake, coolant, oil, transmission, pump gas, clutch, hydraulic fluid, diesel, and nitrous oxide.
9. LTI-DIRECT #ad
LTI 10FT Universal 4AN 1/4" CPE Oil/Gas/Fuel Line Hose Stainless Steel Braided -AN4 Silver #adLTI-DIRECT #ad
- Based on premium stainless steel & T7 Aluminum Alloy materials & Nylon, firmly, securely, light weight and portable. Lti provided 12 months warranty from the date of purchased. Operating temperature: -40 Degree F to +350 Degree F. Outside Diameter: 044" / 11.
13mm. Application: universal, coolant and air for automobiles or marine engines, ethanol, lube, Such as fuel, alcohol, most suitable for racing cars & motor racing bikes etc. Working pressure: 1000 psi / 69 bar; burst pressure: 6000 psi / 420 Bar. Free return within 30 days NO QUESTION ASK. Inner diameter: 022" / 5. 56mm.
10. iRuiZhe #ad
4AN 10Ft Universal Braided Oil Fuel Line Hose Stainless Steel Nylon for 1/4" Tube Size #adiRuiZhe #ad
- Application for: racing fuel, fuels with ethanol, diesel, alcohol based fuels, pump gas, motor oil & coolant etc. Inner diameter: 5. 56 mm 022 inch, outer Diameter: 11. 17 mm 044 inch. Working pressure: 500 psi / 34.
5 bar; burst pressure: 2000 PSI / 138 Bar. Operating temperature: -40 Degree F to +350 Degree F. Note:our process has been modified to fit the E85. Material: innter hose: cpe synthetic rubber The middle layer: 304 stainless steel wire mesh sleeve; The outer layer: High quality braided nylon.