Top 10 6AN to 3/8 Barb 90 Degree – Automotive Replacement Fuel System Fittings

As an Amazon Associate I earn from qualifying purchases.

1. AC PERFORMANCE

#ad

Female 6AN AN6 To 3/8" 3/8 inch 9.52mm Barb 90 Degree Swivel Hose Fitting Aluminum Hose Barb Fuel Line Adapter Black Anodized

#ad
AC PERFORMANCE #ad - Material:made of 6061 T6 lightweight aluminum alloy. Size: female 6an to 3/8 barb, 90 degree swivel hose fitting. Colour: Black. Each component is precision-machined to exact tolerances for trouble-free performance. Manufactured using aluminum alloys that meet or exceed minimum requirements for hose fittings.
BrandAC PERFORMANCE #ad
ManufacturerAC PERFORMANCE #ad
Height0.6 Inches
Length1.5 Inches
Weight0.02 Pounds
Width0.6 Inches
Part NumberBN9006-038_BK
ModelBN9006-038_BK
Warranty1 year quality warranty

2. K-MOTOR PERFORMANCE

#ad

6AN to 3/8 Barb, Hose end Fitting, 90 Degree

#ad
K-MOTOR PERFORMANCE #ad - 6an to 3/8 barb - female to Male an6. 90 degree - Black Color. Includes: 1 Piece. Suitable for most fluids Fuel, Oil, Coolant, Air. Barb size 3/8 or 9. 5mm.
BrandK-MOTOR PERFORMANCE #ad
ManufacturerK-MOTOR PERFORMANCE #ad
Part NumberKR-PL6-90
ModelKR-PL6-90

3. EVIL ENERGY

#ad

EVIL ENERGY 6AN 90 Degree Push Lock Hose Fitting End Black

#ad
EVIL ENERGY #ad - Material: made of aluminum alloy, reusable and recyclable. Please attention that an6 push lock hose barb only compatible with rubber fuel line. Size: 6an female to 3/8" barb, and that of 6an thread size is 9/16-18UNF. Max pressure: 2000psi, temperature range: -40℉ to 248℉. Evil energy provide 3 angles of 6an hose barb: straight, 45degree, 90degree.
BrandEVIL ENERGY #ad
ManufacturerSpeedwow Tuning #ad
Weight0.04 Pounds
Part NumberCS00465D90
Model.

4. EVIL ENERGY

#ad

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 90 Degree Blue&Red 2PCS

#ad
EVIL ENERGY #ad - Please attention that an6 push lock fitting only be worked with rubber fuel line. Thread size of 6an 90 degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8". Push on locking fittings are much more easier on installation than swivel and PTFE fittings. 6an female swivel to 3/8 barb fitting 90 Degree. Evil energy provide plenty kind of fuel fittings, Push-on lock, Swivel, PTFE hose end and other fitting adapters. It can not be installed on ptfE Hose, Nylon Braided Hose, or Stainless Steel Braided Hose. High-pressure system not recommended.
BrandEVIL ENERGY #ad
ManufacturerSpeedwow Tuning #ad
Part NumberEV01111D90RL

5. autoBbox

#ad

AutoBbox 6AN Female to 3/8 Hose Barb Fuel Fittings 90 Degree Aluminum AN6 to 3/8 inch Oil Line Pipe Adapter Black Anodized

#ad
autoBbox #ad - Each component is precision-machined to exact tolerances for trouble-free performance. Black anodized Finish for Durability ang Strength. Such as: oil/ fuel/ water/ fluid/ Air Line with AN6 to 5/16". Made of high performance lightweight 6061-T6 CNC Machined Billet Aluminium Material. Universal fit. Female -6 an 9/16"x18 to 3/8 inch barb 9. 5mm fuel fitting adaptor, 90 degree.
BrandautoBbox #ad
ManufacturerautoBbox #ad
Part NumberWBN9006-38-blk

6. Musibo

#ad

Pack for 2, 90 Degree, 6AN to 3/8 Barb Push Lock Hose End Fitting For Rubber Fuel Oil Line

#ad
Musibo #ad - It can not be installed on PTFE Hose, Nylon braided hose, or stainless steel braided hose. Package:push lock hose fitting end *2, hose clamp * 2.

Thread size of 6an 90 degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should ID be 3/8". Push lock fitting only be worked with rubber fuel line. Hose end fittings are made of high-quality aluminum alloy material for strong strength. Push lock fitting is widely used to connect engine with air filter, the engine with radiator system, automobile air conditioning system, oil cooler etc. Polished and anodized surface provide the bright appearance and corrosion protection.
BrandMusibo #ad
ManufacturerMusibo #ad
Height1 Inches
Length2.16 Inches
Width2.15 Inches

7. ESPEEDER

#ad

SYKRSS 6AN 90 Degree Push Lock Swivel Hose End Fitting For Rubber Fuel Line Black 2Pcs

#ad
ESPEEDER #ad - Size : 6an 90 degrees hose fitting; push lock hose fitting made of lightweight 6061-T6 aluminum, black anodized surface has anti-corrosion effect. Push on with 37- degree mating angle which provided superior sealing 2. Three anti-leakage designs : 1.

Push on lock fitting raised edges stop the hose from sliding and prevent leakage 3. Aluminum hose cover for hose sliding and protection of hose ends, have a smooth snag-free performance. This weld-free fitting that gives better fluid flow and integrity over the normal brazed together hose ends fitting. Performance : the hose end fitting is resistant to high temperature and high pressure, Working Temperature range is -40°F to +248°F, Max pressure is 13. 8mpa 2000psi, durable and reusable.

Function : swivel hose end fitting usually used for oil/ fuel/ water/ fluid/ airline etc. Not compatible with PTFE hose, nylon baided hose or stainless steel braided hose. Suitable for EFI systems rubber push-lock oil hose. Easy to use :hose fitting are easy to install, we normally recommend a bit of assembly lube to push the hose onto the nipple. Connect engine transmission oil cooler, engine and air filtration system, engine and cooling system.
BrandESPEEDER #ad
ManufacturerNansheng #ad
Part Number2AZ111AN6D90

8. AC PERFORMANCE

#ad

Black Aluminum 90 Degree Elbow -6 AN AN6 Male To 3/8" NPT Male Fitting Adaptor Connector

#ad
AC PERFORMANCE #ad - Precision machined to exacting tolerances for trouble-free performance. Surface treatment: black anodized finish for durability and strength. Size: 3/8" npt male to male -6 an thread jic 6, 9/16"x18 tube adapter, Degree: 90 deg elbow. Each component is precision-machined to exact tolerances for trouble-free performance. Manufactured of high performance lightweight 6061-T6 cnc machined aluminum.
BrandAC PERFORMANCE #ad
ManufacturerFOURAGE #ad
Height0.6 Inches
Length1.5 Inches
Weight0.02 Pounds
Width0.5 Inches
Part NumberAN822-6-6D_BK
Warranty1 year quality warranty

9. EVIL ENERGY

#ad

EVIL ENERGY 6AN Female to 3/8'' Push on Hose Barb Fitting Adapter Straight Swivel Aluminum Alloy Black

#ad
EVIL ENERGY #ad - Note:barbed style fittings are limited to relatively low pressuresusually below 4000 psidue to the limitations of the soft and flexible tubing, Please confirm whether this connector meets your needs.

Besides, it can flow both ways and reuse. Simple installation - female thread adapter: only need to tighten the thread. Barb adapter: put the hose over the barb and use a hose clamp to tighten it for seal the connection. Female 6an to 3/8 inch push on hose barb connector is made of aluminum alloy 6061-T6 for the transition from pipe threaded connector to hose, Petrol, fuel filter and can work with all kinds of fulid-oil, fuel pump, Desiel, which is suitable for fuel system such as fuel hose line fitting, Water.

Evil energy provide this product have 3-month warranty. Please contact us first if you have any doubts after receiving the product. 6an thread size is 9/16 unf, used for 6an male thread fitting;The barb can use in 3/8" inner diameter fuel hose.
BrandEVIL ENERGY #ad
ManufacturerSpeedwow Tuning #ad
Part NumberEV01757S1BK

10. ESPEEDER

#ad

SYKRSS 8AN 90 Degree Push Lock Swivel Hose End Fitting For Rubber Fuel Line Black

#ad
ESPEEDER #ad - Easy to use :hose fitting are easy to install, we normally recommend a bit of assembly lube to push the hose onto the nipple. Function : swivel hose end fitting usually used for oil/ fuel/ water/ fluid/ airline etc. Push on lock fitting raised edges stop the hose from sliding and prevent leakage 3.

Aluminum hose cover for hose sliding and protection of hose ends, have a smooth snag-free performance. Size : 8an 90 degrees hose fitting; push lock hose fitting made of lightweight 6061-T6 aluminum, black anodized surface has anti-corrosion effect. This weld-free fitting that gives better fluid flow and integrity over the normal brazed together hose ends fitting. Push on with 37- degree mating angle which provided superior sealing 2.

Performance : the hose end fitting is resistant to high temperature and high pressure, Max pressure is 13. 8mpa 2000psi, working temperature range is -40°F to +248°F, durable and reusable. Suitable for EFI systems rubber push-lock oil hose. Not compatible with ptfe hose, engine and air filtration system, nylon baided hose or stainless steel braided hose. Three anti-leakage designs : 1.
BrandESPEEDER #ad
ManufacturerNansheng #ad
Part Number2AZ0013Bk-AN8D90