Top 10 5/8 Fuel Hose Elbow – Automotive Replacement Heater Hoses

As an Amazon Associate I earn from qualifying purchases.

1. ACDelco

#ad

ACDelco Professional 14243S 90 Degree Molded Multi Purpose Hose

#ad
ACDelco #ad - Can be used with hose connectors and bulk heater hose for virtually complete molded heater hose coverage. Resists water permeation to increase the life of the hose. Installs without buckling, bending out of shape, or straining at the connection for easy installation. Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function.
BrandACDelco #ad
ManufacturerACDelco #ad
Height1.2 Inches
Length7.7 Inches
Weight0.15 Pounds
Width1.2 Inches
Part Number14243S
Model14243S
WarrantyLimited Lifetime as long as original purchaser owns vehicle. (Parts Only)

2. theBlueStone

#ad

TheBlueStone -4AN -6AN -8AN -10AN Braided Fuel Line Hose 10FT -10AN Nylon Braided for 5/8" Tube Size

#ad
theBlueStone #ad - Burst pressure: 2000 PSI. Inner diameter: 14. 27 mm 056 inch, outer Diameter: 2083 mm 082 inch. Working temperature: -40°F to +300°F. The fitting adapter for PTFE hose is NOT FIT. Our rubber hose should compatible with rubber fitting adapter. Note: double check the hose size before bidding. Application for: racing fuel, diesel, pump gas, fuels with ethanol, alcohol based fuels, motor oil & coolant etc. Working pressure: 500 psi.
BrandtheBlueStone #ad
ManufacturertheBlueStone #ad
Weight1.54 Pounds
Part NumberGCR422
ModelGCR422

3. steber

#ad

3 feet, Fuel Line 3/8 ID NBR Hose 6AN Push on Hose 5/8 OD for Small Engines

#ad
steber #ad - Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines. The fuel lines for fuel injected systems, are oil resistant, cold-resistant and ethanol tolerance. Id: 3/8 inch, od: 5/8 inch, 6 an nbR liner hose fuel injection 3 feet. Working pressure 2mpa. Burst pressure 6mpa, handles temperature ranges of -40 to +275 degrees F. Push on / lock hose designed for conveying gasoline, diesel, and bio-diesel fuels in cars, buses, E-85, trucks, etc.
Brandsteber #ad
Manufacturersteber #ad
Part NumberBNY12OD16-5

4. Byredio

#ad

9/16 ID Fuel Line 10ft 5/8 Stainless Steel Nylon Braided Transmission Lines for Oil, Clutch, Transmission, Brake, Cooler, Fluids, Gas, 10AN Hose

#ad
Byredio #ad - It also results in more fluidity in transmission. But not fit e85. The 9/16 fuel hose has good retardancy and excellent corrosion resistance. Please note that the hose inner diameter is 14. 22mm 056 inch and the Hose Outside Diameter is 2006mm 079 inch. Oil resistant, can be cut to size for all your applications.

Cut the size as you want - the 10an line is 10 feet / 3 m, the 9/16 hose can be applied to higher-intensity temperature and pressure environments. Steel, aluminum, or plastic lines will not bend as easily as this tube. The superior bending ability of this fuel tube makes it easier to install. Nylon braided - the 10an hose kit can stand -104ºf to +302 ºf/-40ºc to +150ºc, fuel filter, and transmission system, oil return, the maximum working pressure up to 500 PSI. Wide application - the 10an hose is specially designed to compatible with any fuel including methanol and nitromethane, pump gas, hydraulic fluid, diesel, oil, brake, clutch, transmission, coolant, and nitrous oxide.

High-quality material - the high-pressure 10an hose covered with high quality is woven Nylon and 304 stainless steel braided + CPE synthetic rubber to enhance flexibility and give a cool racing appearance. Best for the brake system, fuel pump, turbo cooler system, fuel return system, oil cooler kit, etc. Our braided fuel line is also an excellent alternative to conventional fuel lines, cold-resistant, and ethanol tolerance.
BrandByredio #ad
Manufacturerfuel line #ad
Part Numberfuel line

5. AFATEBOX

#ad

Fuel Line Quick Connector 5/8 Bundy Female to Barb 90 Degree for 5/8 Steel to 9/16 ID Nylon Tubing

#ad
AFATEBOX #ad - Fuel line 5/8 inch 90 degree elbow quick connect / disconnect for oil fuel pump adaptor. Fitting attachment 2: hose barb fit for 9/16 ID nylon tube barb size is 5/8. Bundy fuel line quick connector that adapts 5/8 In. Id nylon line, barb diameter is 5/8. Fitting attachment 1: female Quick-Connect fit 5/8 fitting, could be fuel pump or maybe a filter. Please measure your adapter and nylon tubing size inside diameter to see if it is the same. Steel to 9/16 In. Pack of 1.
BrandAFATEBOX #ad
ManufacturerautoBbox #ad
Part NumberPL90-58ID14-blk
ModelPL90-58ID14-blk

6. EVIL ENERGY

#ad

EVIL ENERGY 10AN Fuel Line Kit,Nylon Braided Fuel Hose CPE 10FT Black9/16"ID

#ad
EVIL ENERGY #ad - Maximum working pressure: 500psi. Made of cpe synthetic rubber and nylon braided. Temperature range: -40℉ to 257℉. Evil energy provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message. Professional installation is highly recommended. Hose od: 0783inch. Length: 10feet. Bursting Pressure: 2000psi. Package includes: 6pcs 10an swivel hose ends 2pcs straight, 2pcs 45degree, 2pcs 90degree and 10an nylon braided fuel line. Hose id: 9/16".
BrandEVIL ENERGY #ad
ManufacturerSpeedwow Tuning #ad
Part NumberFBA-KT00400BB
ModelFBA-KT00400BB

7. EVIL ENERGY

#ad

EVIL ENERGY 5/8 Fuel Hose Line NBR Rubber 30R7 10FT 300PSI

#ad
EVIL ENERGY #ad - Evil energy provide 10ft 5/8inch fuel hose 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message. Applicable medium: 5/8 id fuel line can work with diesel/biodiesel/gasoline/Oil/grease/water and air, etc. Minimum Bend Radius: 6. 3inch160mm. Working pressure: 300psi. Id: 5/8inch 16mm, od: 094inch24mm. Material: NBR. Application: sae 30r7 rubber fuel line widely used in fuel system, oil cooling, PCV system, steam emission, please check the pressure of application before perchase. Burst pressure: 1160psi. Temperature range: -40°F to 257°F.
BrandEVIL ENERGY #ad
ManufacturerSpeedwow Tuning #ad
Part NumberEV01821BK
ModelEV01821BK

8. HPS

#ad

100 PSI Maximum Pressure, 5/8" ID, HPS HTSEC90-062-BLK Silicone High Temperature 4-ply Reinforced 90 degree Elbow Coupler Hose, Black, 4" Leg Length on each side

#ad
HPS #ad - Made of high temp 4-ply Reinforced Silicone. Silicone hose is not compatible with fuel or oil; Inside Diameter:5/8. Meet and exceed saej20 industry standards, ideal for heavy duty pressure connections and provides excellent resistance for high temperature applications. Great for marine and industrial use, custom turbo or intercooler piping fabrication, DIY intake or radiator cooling system. Uv and ozone resistant.
BrandHPS #ad
ManufacturerHPS Silicone Hoses #ad
Height0 Inches
Length0 Inches
Width0 Inches
Part NumberHTSEC90-062-BLK
ModelHTSEC90-062-BLK
Warranty2 year manufacturer warranty

9. LDR Industries

#ad

3/8", LDR Industries 516F385 5' Bag Fuel Line

#ad
LDR Industries #ad - Ideal for transfer of petroleum products fuel lines for small engines. Use hose barbs and clamps. Made in usa goodYear / Continental Hose. Abrasion resistant. Convenient 5-Feet length.
BrandLDR Industries #ad
ManufacturerLDR Industries #ad
Height6.5 Inches
Length8 Inches
Weight0.26 Pounds
Width1.25 Inches
Part Number516F385
Model516 F385

10. RetroMotion Innovations

#ad

Sidewinder 3/8" Molded Curved Fuel Line Rubber Hose Elbow Universal 45 90 135 180

#ad
RetroMotion Innovations #ad - Unique "swan" shape allows you to cut out a 45, 135, 90, and 180 degree bend. Fiber-reinforced nbr rubber - Meets and Exceeds SAEJ30R7 Specifications. Max working pressure 75psi Burst pressure 250psi. 3/8" id.
BrandRetroMotion Innovations #ad
ManufacturerRetroMotion Innovations #ad
Weight0.23 Pounds
Part NumberRMI-33003