As an Amazon Associate I earn from qualifying purchases.
1. ZHUBANG #ad
Heat Hose Fiberglass Wrap Shield Sleeve Wire Fuel Line Heat Shield Roll High Temp Black Colour Adjustable 10FT-13MM1/2" for Car Wire Loom Protection #adZHUBANG #ad
- Simply pull the wires inside, AN hoses, cables, cables, etc. Best service - if you have any questions about our heat Hose Fiberglass Wrap, please contact us in time, we will provide you with a refund service.
If you have any questions, we will do our best to serve you. Application: heat sleeve fiberglass can withstand 1100°F continuous and 2000°F intermittent. Material: the heat sleeve fiberglass is mainly made of high quality fiber glass.
It's can reduces radiant heat by up to 60%. Easy to install: our fiberglass sleeves are specially woven and can be expanded and shrunk by fittings, terminals, etc. Effect:helps prevent steam lock and prevent wire melting. It is best to wear long sleeved gloves when installing.
2. Heatshield Products #ad
Heatshield Products 204011 3/8" ID x 10' Hot Rod Sleeve Roll #adHeatshield Products #ad
- Helps to prevent vapor lock, protects wires from melting, shields oil and brake lines. Capable of reducing up to 60 percent of radiant heat.
Continuous operating temperature of 1100 degree Fahrenheit, 2000 degree Fahrenheit intermittent. Special weave that allows it to expand and contract over fittings, terminals and more.
3. LEDAUT #ad
Heat Hose Fiberglass Wrap Shield Sleeve- 1/2" ID x 10'Black Adjustable Hose Heat Shield Spark Plug Wire fuel line heat shield Roll For Car Wire Loom cable Heat Shield Brake Line Cable Heat Shield #adLEDAUT #ad
- This black auto wire heat shield is mainly made of high quality fiber glass. Easy to installation. Simply pull the wires inside, AN hoses, cables etc.
Fiberglass auto sleeving withstands operating reflective temperature of 600℉continuous and 1100℉intermittent. Caution: keep it away from the open fire ! Capable of reducing up to 60 percentage of radiant heat.
Our fiberglass sleeving special weave that allows it to expand and contract over fittings, cable, terminals and more. Black fiberglass hot rod car sleeve helps to prevent vapor lock, protects wires from melting, AN hoses, shields oil and brake lines.
4. A-Team Performance #ad
A-Team Performance 10418 Heat Shroud Aluminized Sleeving for Ultimate Heat Shield Protection Barrier Cover with Hook and Loop Closure Silver 3/4"x36" 3ft #adA-Team Performance #ad
- Withstands 500 degrees f direct, continuous heat and 2000 degrees F radiant heat. Includes 1 x a-team performance 10418 heat shroud aluminized Sleeving for Ultimate Heat Shield Protection Barrier with Hook and Loop Closure 3/4"x36" 3ft.
Pliable for tight bends, trim to desired length. Added convenience of a hook & loop closure design along the open edges. Made from a high temperature rated glass fiber fabric with an aluminized outer facing.
5. WISAUTO #ad
WISAUTO High Temp Black Auto Heat Sleeve Fiberglass Adjustable Heat Shield Black Color 5FT X 26MM1'' #adWISAUTO #ad
- The thick material is long enough to protect all kinds of wires as it nears the header or exhaust manifold helping to increase longevity of wire covers can withstand heat up to 2500 degrees. These universal heat protector sleeve can provide a good heat protection to spark plug wires especially on engines with excessive exhaust headers.
Also fit for most angled & straight boots. Excellent performancethe heat shield are widely used as a solution to your burning spark plug wires and other auto wires which create a lot of heat.
Fits most hot rods and classics engine. Universal 5fT or 10FT length. Convenient to applythe heat sleeves also work well with 90 degrees, 45 degrees, and straight heat socks.
Suitable sizemany size to choose, diameter 6mm/10mm/13mm/20mm/26mm to choose, and the length 5ft and 10ft to choose. Reliable materialthe black heat shield is made of high temperature fiberglass material. After-sale guaranteePlease check up the part number of your origina item before purchase it.
6. X AUTOHAUX #ad
X AUTOHAUX Car Heat Shroud 3/8" ID 3.2ft Aluminized Sleeving Insulated Shield Sleeve Heat Wire Shield Sleeve for 3/8" OD Fuel Lines Heat Protection #adX AUTOHAUX #ad
- Easy to install and save your time. The protection strap fits for 3/8" OD hose or wire. Dimension: total length: 1 meter/3. 2ft; width: 7. 5cm/2.
95"; inner diameter: 10mm / 3/8". Good insulation exhaust header wrap tape. Improving car wire and line performance. A durable product, will not shrink. Wide application: the wrap can be used on the car fuel line, cable and electrical wiring, automobile engine exhaust manifold, etc.
Installation: just wrap the heat insulation tape around the exhaust pipe and fix it with adhesive tape. Good performance: it is a good replacement for the old or broken one. Function: decreases the temperature of the engine compartment to protect the wire. Keeps wire heat under wrap.
7. Design Engineering #ad
Design Engineering 010669 Vapor Block 5/8" I.D. x 36" Fuel Line Sleeve #adDesign Engineering #ad
- Can be used on any cable, hose or line for added heat protection. Fit type: Universal Fit. Installs easily with a split design and adhesive flap - no need to disconnect the fuel line.
Made of glass fiber and polyester laminated to an aluminum outer layer. Direct heat resistance to 340°F. Specifically developed to prevent vapor lock in fuel systems by greatly reducing heat in the line to keep fuel cooler and below boiling.
8. Design Engineering #ad
0.375" x 3', etc., Design Engineering 010470 Fire Sleeve and Tape Kit Heat Protection for Wires, Hoses #adDesign Engineering #ad
- Use for bundling and protecting hoses, electrical wiring, etc. You can achieve between 1/16 and 1/8 inch stretch out of our material.
Constructed of a woven insulated glass fiber braided sleeve heavily coated with 100% iron oxide silicone rubber; includes 16-inches Fire Tape. If you have fittings on your line, you may need to order one size up.
Withstands 500 degrees f continuous heat and 2000 degrees f intermittent heat. From high temperatures. This may help on installs with fittings already on the lines. Provides burn protection during under-hood repairs and maintenance. Insulates wiring, hoses, oil / brake / transmission lines, and more.
9. LEDAUT #ad
Ledaut Heat Wrap Shield Sleeve Wire Hose Fiberglass 3/4" ID Silicone Coated Fiberglass 3.3FT Heat Shielded with Hook and Loop Closure #adLEDAUT #ad
- Length: 3. 3 feet100cm. Top qualityhigh-temperature, flexible insulating sleeving withstands 500 Degree Fahrenheit continuous heat and up to 1000 Degree Fahrenheit intermittent heat. Best materialid: 3/4"19 mm.
Simple to useeasy to install with hook & loop closure, Ideal for protecting hoses, helps to prevent vapor lock, oil and fuel lines from heat and to prolong the life, electrical wiring, protects wires from melting.
Made of standards silicone rubber coated fiberglass sleeve, can be cleaned and protects against abrasion. Free guranteedledaut's guarantee, 100% satisfied customer service.
If you have any questions or unsatisfied with our fiberglass sleeve, please feel free to contact us and we will help you ASAP. Super valueconstructed of a woven insulated glass fiber braided sleeve heavily coated with 100% iron oxide silicone rubber. Resistant to hydraulic fluids, lubricating oils, and fuels, insulates against energy loss in piping and hosing.
10. AC PERFORMANCE #ad
3/8 ID, 3 Feet 9.5 mm ID, AC PERFORMANCE 3/8 ID Silicone Coated Fiberglass Heat Shielded Fire Sleeve for Hose Lines & Electrical Wiring #adAC PERFORMANCE #ad
- High-temperature, flexible insulating sleeving withstands 500 Degree Fahrenheit continuous heat and up to 1000 Degree Fahrenheit intermittent heat.
Ideal for protecting hoses, electrical wiring, oil and fuel lines from heat and to prolong the life. Length: 3 feet. Resistant to hydraulic fluids, and fuels, lubricating oils, insulates against energy loss in piping and hosing.
Made of standards silicone rubber coated fiberglass sleeve, can be cleaned and protects against abrasion. Burn protection during under hood repairs and maintenance, helps to prevent vapor lock, protects wires from melting. Id: 3/8".