As an Amazon Associate I earn from qualifying purchases.
Upower #ad - Pack of 1; professional installation is highly recommended; No instruction included. Please do measure your tailpipe. Id: 2. 5" od: 5. 5"x3" length: 9" Angled Roll Oval. For tailpipes of 2.
DC Sports #ad - Resonated to enhance sound. Easy install, bolts on in minutes. Note:to install you simply loosen the three bolts and tighten around the factory exhaust pipe. Fits- 1. 75-2. 5 inch Piping. 3 bolt clamping System. Polished silver finish. Adds visual appeal.
AUTOSAVER88 #ad - Dimension: standard 2. 5" x 5. 5"x3" x 9" inlet, outlet, and overall length respectively. Stylish look: stainless steel material made with powder coated black finish provides a stylish look for your vehicle instead of the rusted old tailpipe.
Notice: please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip 2. 5 inches. Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage.
Not just make it louder: thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds. Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 2. 5 inches. Daily maintenance: to make this exhaust tip has a long-life service - Please Sweep away the welding debris, white ash, cement, putty, oil, sand ash regularly to keep the surface clean.
RP Remarkable Power #ad - Important note: installation instruction is not included, professional help in installation may be needed. Material: made by high quality stainless steel, polish stainless surface, light weight, heat-resisting, anti-corrosion and decorate appearance.
WESDON #ad - Polished Stainless Steel. 2. 50 in inlet 6. 0 x 2. 25 in outlet 9. 00 in Long. Rolled Oval Angle. Weld on or clamp On Style Polished Stainless Steel. Please measure to make sure it fits your Car or Truck. Fits a 2. 50 exhaust pipe 6. 0 x 2. 25 inch outlet.
Upower #ad - Professional installation is highly recommended. Dimension2. 5 inch inlet; 2" x 6" inch Outlet ; 10 inch Overall Length. Materialhigh quality stainless steel T304 mirror polished.
WESDON #ad - Weld on Style. Fits a 2. 25 exhaust pipe 5. 50 x 2. 25 inch Outlet. Rolled Oval Resonated. 2. 25" inlet 5. 50 x 3. 00" high 7. 00" long double wall Rolled Oval Resonated Black Stainless Steel. Black powder coated stainless Steel Please measure to make sure it fits your Truck.
UPOWER #ad - Designweld on - double Wall - Slant Angle Cut. Durable and anti-corrosive, protect the original tips from Sun and Rain, avoid rusting and deformation. 1 year warrantyno instruction is included.
So be sure to measure the tailpipe. Materialhigh quality stainless steel mirror polished. Professional installation is highly recommended. How to choose1, the inlet size of exhaust tip must match the diameter of your existing tailpipe for a proper fit.
ECCPP #ad - Function - durable exhaust tip, protect your original pipe from the sun and rain, avoid rusting and deformation. Note - please check tailpipe dimension to verify if this exhaust tip fit your car or not before your ordering.
UPOWER #ad - Durable and anti-corrosive, protect the tips from Sun and Rain, avoid rusting and deformation. Dimension2. 5 inch inlet; 2" x 6" inch outlet ; 10 inch Overall Length, and if the outlet diamater of your tailpipe is about 2.
1. Upower
#adUpower Square Exhaust Tip 2.5" Inlet 3" x 5.5" Outlet 9" Long Chrome Stainless Steel Polished Diesel Pipe Weld-On
#adMore information #ad
5 inch outER diameter only. Fits: to ensure proper fit make sure your exhaust inlet diameter is 2. 5 2 1/2 inch. Materials: made of high quality Stainless steel has very strong anti-corrosive, Never Rusty. Weld on installation and Square Single Angled Cut - Rolled Edge Design.| Brand | Upower #ad |
| Manufacturer | Partssquare #ad |
| Part Number | 186480 |
| Warranty | 1 Year |
More information #ad
2. DC Sports
#adAnd Trucks, Polished Stainless Steel, Sedans, DC Sports EX-1013 Performance Bolt-On Resonated Muffler Slant Exhaust Tip with Clamps and Adapters for Universal Fitment on Most Cars
#adMore information #ad
| Brand | DC Sports #ad |
| Manufacturer | Pilot Automotive #ad |
| Height | 9 Inches |
| Length | 4 Inches |
| Weight | 1.55 Pounds |
| Width | 4 Inches |
| Part Number | EX-1013 |
| Model | EX-1013 |
More information #ad
3. AUTOSAVER88
#adAUTOSAVER88 2.5 Inch Inlet Black Exhaust Tip, 2.5" Inlet 5.5"x3" Outlet 9" Overall Length Stainless Steel Exhaust Tips Powder Coated Finish Tailpipe
#adNotice: please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip 2. 5 inches. Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage.
More information #ad
We recommend to do above action once a month. Also the clamp-on design make it super easy to fastens to your exhaust pipe without any hassle. Not just make it louder: thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds. Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 2. 5 inches. Daily maintenance: to make this exhaust tip has a long-life service - Please Sweep away the welding debris, white ash, cement, putty, oil, sand ash regularly to keep the surface clean.
| Brand | AUTOSAVER88 #ad |
| Manufacturer | AUTOSAVER88 #ad |
| Height | 5.5 Inches |
| Length | 9 Inches |
| Weight | 1.59 Pounds |
| Width | 2.5 Inches |
| Part Number | EX051 |
| Model | TSET-0008 |
More information #ad
4. RP Remarkable Power
#adEXT03, RP Remarkable Power, 2.5" Inlet 5.5 x 3 Outlet 9 inches Length Stainless Steel Rolled Edge Exhaust Tip
#adMore information #ad
Size: 2. 5 inch inlet, 9 inch overall lehgth, 5. 5x3 inch outlet, 100% Brand New Exhaust Tip. Installation style: weld on design, Angled Cut, Single Layer, Rolled Edge. Function: exhaust waste gas, Reduce Pressure and Noise, Filter the waste gas to reduce pollution.| Brand | RP Remarkable Power #ad |
| Manufacturer | MotorDexon #ad |
| Part Number | RP_EXT03_G2 |
More information #ad
5. WESDON
#adExhaust Tip 2.50" Inlet 6.00" X 2.25" Outlet 9.00" Long Rolled Oval Angle Polished Stainless Steel WOA6002509-250-SS Wesdon Exhaust Tip
#adMore information #ad
| Brand | WESDON #ad |
| Manufacturer | Wesdon #ad |
| Height | 6 Inches |
| Length | 9 Inches |
| Width | 6 Inches |
| Part Number | WOA6002509-250-SS |
| Model | WOA6002509-250-SS |
More information #ad
6. Upower
#adUpower 2PCS Exhaust Tip 2.5" Inlet 2" x 6" Outlet 10" Long Rolled Rectangle Exhaust Tailpipe Tips Stainless Steel Polished Diesel Pipe Weld On
#adMore information #ad
Wide applicationfits 2. 5" inlet diameter car exhaust tail pipe. Designweld on - rolled Edge - Angle Cut. 1 year warrantyno instruction is included. Durable and anti-corrosive, protect the tips from Sun and Rain, avoid rusting and deformation.| Brand | Upower #ad |
| Manufacturer | Partssquare #ad |
| Part Number | GSFW-0601292983 |
| Warranty | 1 Year |
More information #ad
7. WESDON
#adExhaust Tip 2.25" Inlet 5.50 X 3.00" High 7.00" Long Double Wall Rolled Oval Resonated Black Stainless Steel WR55007-225-BK-RS-SS Wesdon Exhaust Tip
#adMore information #ad
| Brand | WESDON #ad |
| Manufacturer | Wesdon #ad |
| Height | 3 Inches |
| Length | 7 Inches |
| Width | 5.5 Inches |
| Part Number | WR55007-225-BK-RS-SS |
| Model | WR55007-225-BK-RS-SS |
More information #ad
8. UPOWER
#adUpower 2PCS 2.5" Inlet 4" Outlet Diesel Exhaust Tip 2.5" to 4" Exhaust Tailpipe 5" Long Double Wall Stainless Steel Weld-On Round Slant Tailpipe Tips 2.5" x 4" x 5
#adSo be sure to measure the tailpipe. Materialhigh quality stainless steel mirror polished. Professional installation is highly recommended. How to choose1, the inlet size of exhaust tip must match the diameter of your existing tailpipe for a proper fit.
More information #ad
3, many automobiles have bumper and cowling cut-outs for factory exhaust tips, Make sure to choose a tip that's long enough to vent the exhaust from under your vehicle, but short enough to keep it looking cool.2, be sure the outlet size of the new tip will clear these cut-outs to avoid any damage or having to trim your body panels. Dimension2. 5 inch inlet diameter;4 inch outlet diameter;5 inch Overall Length.| Brand | UPOWER #ad |
| Manufacturer | Partssquare #ad |
| Part Number | 193701 |
More information #ad
9. ECCPP
#adECCPP Diesel Exhaust Tip 2.5" Inlet 4" Outlet Exhaust Tips 9" Long Mirror Black Powder Coated Black Stainless Steel Exhaust Tailpipe
#adMore information #ad
Material-high quality stainless steel material, durable and anti-corrosive. Fitment-9 inch long exhaust tail pipe fit for any vehicles with 2. 5 inch inlet to 4 inch outlet exhaust tip. Installation - Weld on design, professional installation is highly recommended.| Brand | ECCPP #ad |
| Manufacturer | ECCPP #ad |
| Height | 4.33 Inches |
| Length | 9.45 Inches |
| Weight | 3.22 Pounds |
| Width | 4.72 Inches |
| Part Number | 817159-5211-1607398551 |
| Model | 817159-5211-1607398551 |
More information #ad
10. UPOWER
#adExhaust Tip 2.5" Inlet 2" x 6" Outlet 10" Long Rolled Rectangle Stainless Steel Exhaust Tailpipe Tips Mirror Polished Weld-on
#adMore information #ad
5 inch, then this exhaust tip is what you need. 1 year warrantyno instruction is included. Designweld on - rolled Edge - Angle Cut. Professional installation is highly recommended. Materialhigh quality stainless steel T304 mirror polished. Wide applicationfits 2. 5" inlet diameter car exhaust tail pipe.| Brand | UPOWER #ad |
| Manufacturer | Partssquare #ad |
| Height | 6.69 Inches |
| Length | 10.63 Inches |
| Width | 3.54 Inches |
| Part Number | GSFW-0514497418 |
More information #ad
