As an Amazon Associate I earn from qualifying purchases.

Easy to install - installs in minutes/includes plug-and-play wire harness To install you simply loosen the three bolts and tighten around the factory exhaust pipe. Universal fit for most hitch receivers - fits 2” and 1-1/4” hitch receivers includes reinforced plastic adapter, which are the most common sizes.






Universal - bump step can be mounted to any vehicle with a standard 2 in.
Once secured, the hitch cover provides access to your truck bed, the rear cargo area. Once installed, the rubber pad of the multi-purpose utility step ensures users get a secure, comfortable footing at all times. Easy installation - use of a plug-and-play helps with quick, effortless installation. It offers all-weather protection for your car's bumper.

2 different working heights -the step can be installed upside-down to use at a different height, which can be quite useful if you are worried about a low step making you bottom-out on rough roads, or you want a higher step to access the roof for your cargo box.
And this step has the added bonus of functioning as a tow point to attach heavy-duty tow straps. You could add some tape to prevent movement. Multi-functionality- eapele hitch bumper step uses your vehicle’s rear hitch receiver to make climbing in and out of the back of your vehicle more convenient. The powder-coated steel is weatherproof and durable, 10, it should last for years.

Constructed from molded high impact plastic, it will not rust or corrde, lightweight and compact designed to handle all weather conditions.
1. DNA MOTORING
#ad
DNAMotoring HITST-BK Class Ii/Iii Hitch Step Bar,Black
#adDNA MOTORING #ad - Weight capacity / 18" long bar. Solid all-welded design & construction for maximum strength & safety. 350 lbs. Bolt-on installation / 3" diameter round bar.More information #ad
Fits 1-1/4" and 2" receivers, requires use of a 5/8" hitch pin. Able to withstand road abuse & heavy duty towing purposes to it's specified capacities.Brand | DNA MOTORING #ad |
Manufacturer | DNA Motoring #ad |
Height | 4 Inches |
Length | 19 Inches |
Weight | 6 Pounds |
Width | 12 Inches |
Part Number | HITST-BK |
Model | HITST-BK |
More information #ad
2. Pilot Automotive
#ad
Bully BBS-1104L Black Bull Series Steel Universal Fit Truck LED Brake Light Hitch Step Fits 1.25" and 2" Hitch Receivers for Trucks from Chevy Chevrolet, Toyota, Jeep, Dodge RAM, Ford, GMC
#adPilot Automotive #ad - When hooked up via the included 4-pin connector, the LEDs will also flash along with hazard lights. Once secured, and in the case of an SUV, the lighted hitch cover provides access to your truck bed, roof racks, the rear cargo area.Easy to install - installs in minutes/includes plug-and-play wire harness To install you simply loosen the three bolts and tighten around the factory exhaust pipe. Universal fit for most hitch receivers - fits 2” and 1-1/4” hitch receivers includes reinforced plastic adapter, which are the most common sizes.
More information #ad
Provides easy access - to truck beds, roof racks and sUV interiors. Sturdy, ample step- the 100% steel tube step measures 19” wide and 3. 75” in diameter, with a high-impact, anti-skid step pad. Lets other drivers see you - the lighted hitch cover features LED brake lights to provide added visibility for other drivers.Brand | Pilot Automotive #ad |
Manufacturer | Bully #ad |
Height | 3.75 Inches |
Length | 11.3 Inches |
Weight | 5.64 Pounds |
Width | 18.75 Inches |
Part Number | BBS-1104L |
Model | BBS-1104L |
Warranty | Limited Manufacturer Warranty |
More information #ad
3. Bully
#ad
GMC, Bully CR-605 Chrome Stainless Steel Universal Fit Truck Hitch Step Fits 1.25" and 2" Hitch Receivers for Trucks from Chevy Chevrolet, Ford, Dodge RAM, Jeep, Toyota
#adBully #ad - Includes a removable adaptor. 350 lbs maximum load. Overall dimensions: 3. 75"h x 19"w x 11. 25"l. Fits 1-1/4" and 2" receivers; Requires use of a 5/8" hitch pin. Designed to provide easy accessibility into the vehicle.More information #ad
Brand | Bully #ad |
Manufacturer | Pilot Automotive #ad |
Height | 3.75 Inches |
Length | 11.25 Inches |
Width | 19 Inches |
Part Number | CR-605 |
Model | CR-605 |
More information #ad
4. UFRAME
#ad
UFRAME Bully Black Powder Coated LED Hitch-Mounted Step for 1-1/4" and 2" Hitches
#adUFRAME #ad - 350 lbs maximum load, required hitch pin, sold seperately. Topped with a non-slip high impact plastic step pad. Fits 1-1/4" x 1-1/4" and 2" x 2" trailer hitch receivers. Minor drilling required for installation. Flashes along with turn signals.More information #ad
Heavy-duty, mandrel bent steel construction is long lasting. Long-lasting, energy-efficient, red LEDs. Illuminates when you activate vehicle's brakes or running lights. Matte black powder coat finish delivers a rugged look and resists corrosion. Rubber end caps protect edges and enhance appearance.Brand | UFRAME #ad |
Manufacturer | UFRAME #ad |
Height | 18.75 Inches |
Length | 11.3 Inches |
Weight | 6.5 Pounds |
Width | 3.75 Inches |
Part Number | AMBBS1104L |
More information #ad
5. PM PERFORMOTOR
#ad
Universal Chrome Stainless Steel Trailer Tow Hitch Step Bar,Tailgate Bumper Guard Compatible with 1.25/2 Inch Receiver
#adPM PERFORMOTOR #ad - Corrosion Resistant. Easy to Install. Removable adapter fits 1-1/4" and 2" Receivers. 350 lbs maximum load. Requires use of a 5/8" Hitch Pin. Packages includes:1 x trailer Tow Hitch Step, Hardware as Shown in the Picture Above. Universally fits Class III Hitch Receivers.More information #ad
Brand | PM PERFORMOTOR #ad |
Manufacturer | PM Performotor #ad |
Part Number | PM-45024 |
More information #ad
6. MAXXHAUL
#ad
For Class I and Class II Receivers, MaxxHaul 80875 1-1/4" to 2" Hitch Adapter With 4" Rise and 3-3/8" Drop
#adMAXXHAUL #ad - Rugged full steel construction with Powder Coat Finish to Resist Rust and Corrosion. Maximum load weight Rating: 350lbs Tongue Weight.More information #ad
Perfect for tow hitch accessories like bike Racks, Cargo Carriers and the Like UNIT NOT FOR TOWING. 1-1/4" to 2" fits class i and class ii hitch converter Allowing for 4" Rise & 3-3/8" Drop.Brand | MAXXHAUL #ad |
Manufacturer | MaxxHaul #ad |
Part Number | 80875 |
Model | 80875 |
Warranty | 90 days |
More information #ad
7. BougeRV
#ad
BougeRV 1 1/4 Inch 1.25 Inch Trailer Hitch Cover Plug Insert Rubber Hitch Plug Fits 1.25 Inch Receivers for Subaru Jeep
#adBougeRV #ad - Constructed from quality black rubber, the design is tough and durable. Fit any 1. 25" x 1. 25" receiver tube and easy installation. It features a bracket to be permanently mounted over the receiver tube to prevent misplacing the cover when not in use.More information #ad
Keep your trailer hitch's receiver tube clean and protected when not towing. Hitch cover mounts on your trailer hitch with a friction fit, meaning no hitch pin or clip is required.Brand | BougeRV #ad |
Manufacturer | BougeRV #ad |
Height | 1 Inches |
Length | 5 Inches |
Weight | 0.13 Pounds |
Width | 2 Inches |
Part Number | IRV019 |
More information #ad
8. KAYCENTOP
#ad
KAYCENTOP Universal Hitch Step Anti Slip and Rust Towing Bumper Guard Black Hitch Steps for Most Cars SUV Trucks Pickups with Pin Fits 2 Inch Receivers
#adKAYCENTOP #ad - Premium material - this hitch step is made of solid iron with durable black ED coating + powder coat finish for long-lasting corrosion resistance. Receiver trailer hitch; step pad is 11-4/5” in length and 4” wide, 6” tube with 5 holes for adjustable length, Hitch hole 1/2 inch; Weight Capacity: 220 LBS.Universal - bump step can be mounted to any vehicle with a standard 2 in.
More information #ad
Client support - 30 days money back and 1 YEAR warranty, feel free to contact us for any issue. Applicable scope - to truck beds, and in the case of an SUV, roof racks, roof racks and SUV interiors. Once secured, the hitch cover provides access to your truck bed, the rear cargo area. Once installed, the rubber pad of the multi-purpose utility step ensures users get a secure, comfortable footing at all times. Easy installation - use of a plug-and-play helps with quick, effortless installation. It offers all-weather protection for your car's bumper.
Brand | KAYCENTOP #ad |
Manufacturer | KAYCENTOP #ad |
Height | 2 Inches |
Length | 11.9 Inches |
Weight | 5.4 Pounds |
Width | 4.1 Inches |
Part Number | RC H001 |
More information #ad
9. Eapele
#ad
10,000lbs Rated Tow Strap Capacity, Eapele Tow Hitch Step for 2 inch Receivers, Solid Steel Construction Rust Free Powder Coated
#adEapele #ad - There is also an included pin which can be used to prevent slipping down. Powder-coated solid steel- extremely strong, 000 lbs rated tow strap capacity. Works with 2" receivers-2” square connector.2 different working heights -the step can be installed upside-down to use at a different height, which can be quite useful if you are worried about a low step making you bottom-out on rough roads, or you want a higher step to access the roof for your cargo box.
More information #ad
Ridges offer sure footing with non-skid surface. Tips: the hitch attachment can be loose in some vehicles, which can cause slight rattling. And this step has the added bonus of functioning as a tow point to attach heavy-duty tow straps. You could add some tape to prevent movement. Multi-functionality- eapele hitch bumper step uses your vehicle’s rear hitch receiver to make climbing in and out of the back of your vehicle more convenient. The powder-coated steel is weatherproof and durable, 10, it should last for years.
Brand | Eapele #ad |
Manufacturer | Eapele #ad |
Height | 2 Inches |
Length | 18 Inches |
Weight | 10 Pounds |
Width | 11 Inches |
Part Number | EA97029 |
More information #ad
10. MAXXHAUL
#ad
MaxxHaul 50234 Hitch Mount Bump Step
#adMAXXHAUL #ad - Platform size: 5” x 13-3/4” wide with non-slip surface. Constructed from high-impact nylon, it will help reduce if not prevent costly bumper repair caused by either gently backing up to another vehicle or hitting a wall, post or another vehicle when parking.Constructed from molded high impact plastic, it will not rust or corrde, lightweight and compact designed to handle all weather conditions.
More information #ad
Our maxxhaul hitch step features a 5” x 13-3/4” wide step that has a non-slip surface to create instant step for easy cargo access. Fits standard 2” hitch receiver. A must for pick-up, van or SUV owners with 2” hitch receiver. Maximum load capacity: 300 lbs.Brand | MAXXHAUL #ad |
Manufacturer | MaxxHaul #ad |
Part Number | 50234 |
Model | 50234 |
Warranty | 90 Day Warranty |
More information #ad